The paper presents a mechanical forearm mechanism to extend the pronation and supination (P/S) movement of the trans-radial amputee when he/she is able to conduct the P/S motion partially with his/her remaining forearm. The P/S motions of the existing prostheses and robotic arms developed till now are completely different from those of the human. When we are to develop the robotic prostheses for the amputees, two important issues should be considered such as cosmetic issue to look like normal arm and motion harmony issue between robotic prosthesis and the amputated living arm. Most prostheses do not realize the human-like P/S motion, but the simple rotational motion at the wrist by using the electric motor. In this paper, the well-known spa...
This thesis elaborates on design and fabrication of an artificial mechanical upper limb prototype fo...
The human hand is an is an exceptionally significant part of the human body with a very complex bio...
The research work described in this thesis is concerned with the prototype of an upper-limb prosthet...
The paper presents a design idea of prosthetic forearm for trans-radial amputees based on body power...
During the past few years there was a rapid development in robotic prosthetic limb technology to be ...
The prostheses used by the majority of persons with upper limb amputations today offer a limited ran...
This thesis demonstrates a new design for an upper limb prosthetic wrist that gives 3 independent de...
Automatic capture of an amputee’s own natural biological arm motion for embedding into their motoris...
The intuitive control of bionic arms requires estimation of amputee's phantom arm movements from res...
abstract: Current prosthetic designs have limitations with properly representing the full range of m...
Osseointegrated transradial prostheses have the potential to preserve the natural range of wrist rot...
Purpose: This study examined the kinematic differences between a body-powered prosthesis and a biome...
This paper presents a biomechatronic approach to the design and fabrication of an artificial arm, f...
Although significant technological advances have been made in the last forty years, natural and effo...
The intuitive control of bionic arms requires estimation of amputee’s phantom arm movements from res...
This thesis elaborates on design and fabrication of an artificial mechanical upper limb prototype fo...
The human hand is an is an exceptionally significant part of the human body with a very complex bio...
The research work described in this thesis is concerned with the prototype of an upper-limb prosthet...
The paper presents a design idea of prosthetic forearm for trans-radial amputees based on body power...
During the past few years there was a rapid development in robotic prosthetic limb technology to be ...
The prostheses used by the majority of persons with upper limb amputations today offer a limited ran...
This thesis demonstrates a new design for an upper limb prosthetic wrist that gives 3 independent de...
Automatic capture of an amputee’s own natural biological arm motion for embedding into their motoris...
The intuitive control of bionic arms requires estimation of amputee's phantom arm movements from res...
abstract: Current prosthetic designs have limitations with properly representing the full range of m...
Osseointegrated transradial prostheses have the potential to preserve the natural range of wrist rot...
Purpose: This study examined the kinematic differences between a body-powered prosthesis and a biome...
This paper presents a biomechatronic approach to the design and fabrication of an artificial arm, f...
Although significant technological advances have been made in the last forty years, natural and effo...
The intuitive control of bionic arms requires estimation of amputee’s phantom arm movements from res...
This thesis elaborates on design and fabrication of an artificial mechanical upper limb prototype fo...
The human hand is an is an exceptionally significant part of the human body with a very complex bio...
The research work described in this thesis is concerned with the prototype of an upper-limb prosthet...