AbstractNanostructured Ni/Al2O3 feedstock was prepared by chemical wrapping, spraying dry and gas protected sintering, and nanostructured coatings were deposited subsequently by plasma spraying. XRD, SEM and TEM were used to detect the phase and microstructure of the coatings. The great mass of α-Al2O3 was transferred into γ- Al2O3 during plasma spraying process. The Ni/Al2O3 coatings are composed of irregular fully deformed layers. The grain size of the coatings is about 100nm. There are two states of Ni in the coatings, some of them form uniform thin layer which separate the adjacent Al2O3 phase, and the others form sphericity particle enveloped in Al2O3
Atmospheric plasma spraying (APS) is an interesting technique to obtain nanostructured coatings due ...
The microstructure of a CoNiCrAlY coating vacuum plasma sprayed onto an aluminized MARM002 Ni-base s...
composites possess improved proper-ties such as tensile strength, fatigue strength, hardness, and we...
AbstractNanostructured Ni/Al2O3 feedstock was prepared by chemical wrapping, spraying dry and gas pr...
The plasma spray technique has been used by several researchers to deposit nanostructured ceramic co...
The plasma spray technique has been used by several researchers to deposit nanostructured ceramic co...
This paper describes a preliminary investigation of a nanocomposite ceramic coating system, based on...
The plasma spray technique has been used by several researchers to deposit nanostructured ceramic co...
The aim of the study was to characterize nanostructured Al2O3-13TiO2 coatings deposited by plasma sp...
HVOF thermal spraying has been developed to deposit dense Al2O3-coatings for improved protective pro...
HVOF thermal spraying has been developed to deposit dense Al2O3-coatings for improved protective pro...
AbstractIngredient and microstructure of Ni-Al2O3 nanocomposition coatings fabricated by jet electro...
The development of constituent phases and microstructure in air plasma sprayed alumina (Al2O3) thirt...
Al2O3-13%TiO2 coatings were deposited on stainless steel substrates from conventional and nanostruct...
Nanostructured ceramics and their composites possess improved properties such as tensile strength, f...
Atmospheric plasma spraying (APS) is an interesting technique to obtain nanostructured coatings due ...
The microstructure of a CoNiCrAlY coating vacuum plasma sprayed onto an aluminized MARM002 Ni-base s...
composites possess improved proper-ties such as tensile strength, fatigue strength, hardness, and we...
AbstractNanostructured Ni/Al2O3 feedstock was prepared by chemical wrapping, spraying dry and gas pr...
The plasma spray technique has been used by several researchers to deposit nanostructured ceramic co...
The plasma spray technique has been used by several researchers to deposit nanostructured ceramic co...
This paper describes a preliminary investigation of a nanocomposite ceramic coating system, based on...
The plasma spray technique has been used by several researchers to deposit nanostructured ceramic co...
The aim of the study was to characterize nanostructured Al2O3-13TiO2 coatings deposited by plasma sp...
HVOF thermal spraying has been developed to deposit dense Al2O3-coatings for improved protective pro...
HVOF thermal spraying has been developed to deposit dense Al2O3-coatings for improved protective pro...
AbstractIngredient and microstructure of Ni-Al2O3 nanocomposition coatings fabricated by jet electro...
The development of constituent phases and microstructure in air plasma sprayed alumina (Al2O3) thirt...
Al2O3-13%TiO2 coatings were deposited on stainless steel substrates from conventional and nanostruct...
Nanostructured ceramics and their composites possess improved properties such as tensile strength, f...
Atmospheric plasma spraying (APS) is an interesting technique to obtain nanostructured coatings due ...
The microstructure of a CoNiCrAlY coating vacuum plasma sprayed onto an aluminized MARM002 Ni-base s...
composites possess improved proper-ties such as tensile strength, fatigue strength, hardness, and we...