Smart District Heating: Distributed Generation Systems’ Effects on the Network

AbstractThe European strategy 20-20-20 – providing for energy efficiency increase, pollutant emissions reduction and fossil fuel consumption reduction – leads to an increasing attention on the concept of smart cities. In this scenario, it is important to consider a possible integration between networks and distributed generation systems – i.e. to realize a bidirectional energy flux at the utilities, giving rise to the so-called smart grid – not only for the electrical sector, but also for the thermal energy field. Therefore, the concept of smart grid could be extended to the heat sector in relation to District Heating Networks (DHNs) and considering thermal energy distributed generation systems, such as solar thermal panels or micro-Combined Heat and Power (micro-CHP) generators.In this study several different layouts for the utilities substations in smart DHNs will be presented and discussed. These layouts have been developed in order to allow the bidirectional exchange of thermal energy at the utilities, optimizing the thermal exchange as function of network design temperatures (for both the supply and the return), of utilities’ thermal power requirement and depending on the characteristics of the production system.Further, in this paper the results obtained from the simulations, carried out with the software Intelligent Heat Energy Network Analysis (I.H.E.N.A.) considering the implementation of the elaborated layouts, will be analyzed