Crack Front Shapes and Stress Intensity Factors in Plates under a Pure Bending Loading that Induces Partial Closure of the Crack Faces

AbstractThis paper investigates, both experimentally and numerically, stress intensity factors and evolving geometry of through edge cracks in plates loaded under pure transverse bending; the loading induces partial closure of the crack faces. After performing experiments on steel specimens, it was found that a kink in the crack front forms as the crack grows, changing the initial straight front into an L-shape. To understand the distribution of stress intensity factors along such crack fronts, the observed crack shapes were reproduced in a three-dimensional fracture code (FRANC3D) coupled with a finite element analysis program (ABAQUS). With this coupled system, linear elastic stress analyses were performed considering the nonlinear effects caused by the crack face contact in the compressed region. The proposed methodology computes stress intensity factors along the crack front based on observed crack front shapes obtained from the experimental tests. A method is proposed to treat numerical noise around the crack front kink and at crack front end. In addition, normalized empirical expressions for stress intensity factors are proposed