A modified upper bound approach to limit analysis for plane strain deeply cracked specimens

AbstractThe classical upper bound approach of limit analysis is based on assumption of rigid blocks of deformation that move between lines of tangential displacement discontinuity. This assumption leads to considerable simplification but often at cost of higher estimate of the actual load. Moreover, in many cases, it does not give a correct shape of the plastic field. In order to overcome these limitations a modified upper bound approach is proposed in this article. The proposed approach is basically an energetic approach but unlike the classical upper bound approach it is capable of including presence of statically governed stress field. As an application, of proposed approach, theoretical plane strain solutions are presented for deeply cracked fracture mechanics specimens (single edge cracked specimen in pure bending – SE (PB), single edge cracked specimen in three-point bending – SE (B), and compact tension – C (T) specimens). Plane strain plasticity problem in rigid elastic–plastic mono-material (homogeneous) was solved to evaluate useful parameters like limit load, plastic eta function (ηp) and plastic rotation factor (rp) and in bi-material (mismatch welds) to evaluate mismatch limit load, for deeply cracked specimens. New kinematically admissible velocity fields are proposed for SE (B) and C (T) specimens. Proposed theoretical solutions were confirmed by classical slip-line field solutions, wherever available, and by detailed elastic–plastic finite element analysis with Von-Mises yield criterion. Good agreement was found between proposed solutions and results obtained from the classical slip-line field theory and finite element analysis