Removal of dye from industrial wastewater with an emphasis on improving economic efficiency and degradation mechanism

AbstractThis paper is a report on a research into the impact of different parameters of current density, anode type, temperature, pH, and electrolyte concentration on the removal of Reactive Red 120 in synthesized wastewater through electrocoagulation using solar energy for the purpose of improving economic efficiency of the process. Current density of 45Am−2 proved to be the optimum level for dye removal. Other optimum alternatives were iron anode, a temperature level of 25°C, a pH of 7, and an electrolyte concentration of 15mgL−1. The characterization of the post-treatment product using GC–MS studies revealed intermediate compounds. Cost analysis was also performed for the treatment process. Further, the obtained optimum conditions were applied to the treatment of six samples of real textile effluent. Electrocoagulation was satisfactory in only four of the cases. Lastly, efficiency of treating the real samples was evaluated by subjecting the experimental electrodes to the SEM technique