AbstractMg–3Li–0.4Zr alloys containing RE elements (Gd, La, Nd) (Mg–3Li–RE–0.4Zr alloys) are investigated to reveal the influence of homogenization treatment on microstructures and distributions of RE, Zr elements. It is found that 300 °C × 24 h homogenization treatment shows better improvement on the microstructure including the refinement of grain size, the dispersion of cellular dendrite and low melting point particles. Before treatment, La and Nd segregate effectively at grain boundary and Zr segregates in the form of precipitates. Homogenization treatment induces the reduction of RE segregation. However, the segregation of Zr in precipitates cannot be abated due to the relatively low diffusion rate compared with RE elements
The thesis project investigates the effect of alloying elements Pr, Y and Er addition on the solidif...
In this work, Mg98.5Zn0.5RE1 (RE = Gd and/or Y) and Mg97Zn1Y2 (at%) alloys were subjected to homogen...
The application of segmental semi-solid thixoforming of magnesium alloys is confined due to the dime...
AbstractMg–3Li–0.4Zr alloys containing RE elements (Gd, La, Nd) (Mg–3Li–RE–0.4Zr alloys) are investi...
The effects of homogenizing annealing process on the microstructures and properties of Mg-Gd-Y-Zr ma...
Two-step homogenisation was applied to a 6xxx alloy containing Zr to enhance the characteristics of ...
Additions of rare earth elements to magnesium alloys are qualitatively reported in the literature to...
The effect of 1 wt % Pr addition on ZRE1 cast alloy was investigated using Optical Microscope (OM), ...
In this study, sixteen Mg-Zr alloys were produced to investigate the role of Zr on corrosion of Mg. ...
Homogenization heat treatment on the as-cast Mg-13Gd-3.5Y-2Zn-0.5Zr magnesium alloy was carried out ...
Microstructural changes of DC-cast 5xxx series AI-Mg-Mn alloy modified with Zn addition occurring du...
The Zn based alloy has a high potential to be the next generation of biodegradable implant material....
An effect of alloying element content on mechanical properties and precipitate formation in Mg-RE al...
The effects of Nd addition on the microstructures and mechanical properties at elevated temperatures...
Mg-(1-10)Zn-(4-6)Al-4RE alloys were prepared by high pressure die casting and their microstructures ...
The thesis project investigates the effect of alloying elements Pr, Y and Er addition on the solidif...
In this work, Mg98.5Zn0.5RE1 (RE = Gd and/or Y) and Mg97Zn1Y2 (at%) alloys were subjected to homogen...
The application of segmental semi-solid thixoforming of magnesium alloys is confined due to the dime...
AbstractMg–3Li–0.4Zr alloys containing RE elements (Gd, La, Nd) (Mg–3Li–RE–0.4Zr alloys) are investi...
The effects of homogenizing annealing process on the microstructures and properties of Mg-Gd-Y-Zr ma...
Two-step homogenisation was applied to a 6xxx alloy containing Zr to enhance the characteristics of ...
Additions of rare earth elements to magnesium alloys are qualitatively reported in the literature to...
The effect of 1 wt % Pr addition on ZRE1 cast alloy was investigated using Optical Microscope (OM), ...
In this study, sixteen Mg-Zr alloys were produced to investigate the role of Zr on corrosion of Mg. ...
Homogenization heat treatment on the as-cast Mg-13Gd-3.5Y-2Zn-0.5Zr magnesium alloy was carried out ...
Microstructural changes of DC-cast 5xxx series AI-Mg-Mn alloy modified with Zn addition occurring du...
The Zn based alloy has a high potential to be the next generation of biodegradable implant material....
An effect of alloying element content on mechanical properties and precipitate formation in Mg-RE al...
The effects of Nd addition on the microstructures and mechanical properties at elevated temperatures...
Mg-(1-10)Zn-(4-6)Al-4RE alloys were prepared by high pressure die casting and their microstructures ...
The thesis project investigates the effect of alloying elements Pr, Y and Er addition on the solidif...
In this work, Mg98.5Zn0.5RE1 (RE = Gd and/or Y) and Mg97Zn1Y2 (at%) alloys were subjected to homogen...
The application of segmental semi-solid thixoforming of magnesium alloys is confined due to the dime...