AbstractOxidation of the Ni-based superalloy RR1000 has been undertaken in air over the temperature range 600–900°C for times up to 5000h. The surface oxide consisted of a protective Ti-doped chromia layer but with rutile forming on its outer surface. Sub-surface oxidation of Al and Ti also occurred. The thickening kinetics of the chromia layer were sub-parabolic with initial rates around two orders of magnitude higher than expected for Ti-free chromia. This enhancement and the sub-parabolic kinetics are accounted for by Ti-doping of the chromia layer. Over time the enhancement reduced because of Ti-depletion in the alloy
The current demands of the aviation industry for increased gas-turbine efficiency necessitate higher...
The oxidation behaviour of RR1000 with different surface modifications has been well studied using d...
Oxidation behavior of the uncoated base, Ni–Al coated and Re–Cr-Ni plus Ni–Al coated single-crystal ...
Oxidation of the Ni-based superalloy RR1000 has been undertaken in air over the temperature range 60...
Six conventionally cast chromium-rich titanium-containing alloys based on cobalt and nickel with var...
International audienceTwo ternary alloys, Ni-25Cr-0.25C and Ni-25Cr-0.50C (wt.%) and three versions ...
The oxidation properties of a family of novel polycrystalline Ni-based superalloys with varying Ti:N...
The gas turbine industry has sought to increase the operating temperature of turbines so as to achi...
Multiple oxides were observed during the transient oxidation stage of the polycrystalline Ni-based s...
The oxidation behavior of IN-738LC was studied to develop high-temperature materials for low cost an...
The oxidation behavior of IN-738LC was studied to develop high-temperature materials for low cost an...
International audienceMany cast chromia-forming nickel-based superalloys are reinforced by carbides....
International audienceThe oxidation of a Ni–30Cr alloy at 700 °C in impure argon was studied in orde...
The high-temperature oxidation behaviors of polycrystalline Co-30Ni-10Al-4W-4Ti-2Ta superalloys with...
International audienceThis study focuses on the oxidation behavior of commercially available HR120 i...
The current demands of the aviation industry for increased gas-turbine efficiency necessitate higher...
The oxidation behaviour of RR1000 with different surface modifications has been well studied using d...
Oxidation behavior of the uncoated base, Ni–Al coated and Re–Cr-Ni plus Ni–Al coated single-crystal ...
Oxidation of the Ni-based superalloy RR1000 has been undertaken in air over the temperature range 60...
Six conventionally cast chromium-rich titanium-containing alloys based on cobalt and nickel with var...
International audienceTwo ternary alloys, Ni-25Cr-0.25C and Ni-25Cr-0.50C (wt.%) and three versions ...
The oxidation properties of a family of novel polycrystalline Ni-based superalloys with varying Ti:N...
The gas turbine industry has sought to increase the operating temperature of turbines so as to achi...
Multiple oxides were observed during the transient oxidation stage of the polycrystalline Ni-based s...
The oxidation behavior of IN-738LC was studied to develop high-temperature materials for low cost an...
The oxidation behavior of IN-738LC was studied to develop high-temperature materials for low cost an...
International audienceMany cast chromia-forming nickel-based superalloys are reinforced by carbides....
International audienceThe oxidation of a Ni–30Cr alloy at 700 °C in impure argon was studied in orde...
The high-temperature oxidation behaviors of polycrystalline Co-30Ni-10Al-4W-4Ti-2Ta superalloys with...
International audienceThis study focuses on the oxidation behavior of commercially available HR120 i...
The current demands of the aviation industry for increased gas-turbine efficiency necessitate higher...
The oxidation behaviour of RR1000 with different surface modifications has been well studied using d...
Oxidation behavior of the uncoated base, Ni–Al coated and Re–Cr-Ni plus Ni–Al coated single-crystal ...