Advanced Representation of Tubular Joints in Jacket Models for Offshore Wind Turbine Simulation

AbstractJacket substructures for offshore wind turbines show strong potentials in water depths from 25 up to 70m. A review of state-of-practice and enhanced state-of-the-art modeling of offshore wind turbine jackets is conducted regarding detailed joint properties. The state-of-the-art approach takes advantage of an accurate description of the local joint behavior by use of superelements, enabling more accurate load simulations. Studies conducted in the past highlighted both strong benefits as well as shortcomings of this approach, whereas the drawbacks were mainly related to the size of superelements and the application of local wave loading. This work develops a smart sizing for detailed joint models taking into account the loading and location of the jacket joints. A concept of local wave loading is presented as well. Advice on recommendable parameters is given and enables an optimized superelement application for jacket substructures. As an example the potential for fatigue load reduction is shown using the NREL offshore 5-MW baseline wind turbine and the OC4 reference jacket. The predicted fatigue lifetime was increased by about 15%