AbstractTantalum nitride as a promising material for applications has attracted considerable interest due to such promising properties as superhardness and high temperature stability. In this paper, the TaN films were deposited on the single crystal superalloy by radio frequency (RF) reactive magnetron sputtering in an argon-nitrogen atmosphere. The effect of gas pressure on the mechanical property, morphology, phase structure, residual stress, tribological property of the films is investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray stress measurement and SRV friction and wear test, respectively. The results show that the partial pressure of N2 has a great influence on the phase structure, residual stress and ...
With rapid growth in the semiconductor industry, the need for optimization of nanofabrication proces...
Tantalum silicon nitride (Ta−Si−N) films were synthesized on Si substrate via magnetron ...
This study focused on the study of the influence of nitrogen content on the microstructure, chemical...
AbstractTantalum nitride as a promising material for applications has attracted considerable interes...
Reactive magnetron sputtering was used to deposit tantalum nitride (Ta–N) thin films on Si substrate...
Tantalum nitride thin films were deposited onto WC-6%Co substrates using reactive RF magnetron sputt...
A series of Tantalum Nitride (TaN) films under a reactive direct current magnetron sputtering method...
In this study, tantalum nitride (TaN) thin films were deposited on Si(100) and 316L stainless steel ...
Stress evolution during reactive DC magnetron sputtering deposition in TiN, ZrN and TaN films at dif...
Sputter deposited tantalum (Ta) thin films can form in 2 phases: the metastable tetragonal phase ([b...
The main purpose of this work is to present and to interpret the change of structure and physical p...
Thin tantalum nitride layers were sputtered using Linear Dynamic Deposition (LDD) implemented in the...
AbstractThe influence of deposition conditions on the residual stress of sputtered tantalum thin-fil...
The influence of deposition conditions on the residual stress of sputtered tantalum thin-film has be...
In this study, two tantalum nitride-based coatings were synthesized onto Ti-6Al-4V substrates with t...
With rapid growth in the semiconductor industry, the need for optimization of nanofabrication proces...
Tantalum silicon nitride (Ta−Si−N) films were synthesized on Si substrate via magnetron ...
This study focused on the study of the influence of nitrogen content on the microstructure, chemical...
AbstractTantalum nitride as a promising material for applications has attracted considerable interes...
Reactive magnetron sputtering was used to deposit tantalum nitride (Ta–N) thin films on Si substrate...
Tantalum nitride thin films were deposited onto WC-6%Co substrates using reactive RF magnetron sputt...
A series of Tantalum Nitride (TaN) films under a reactive direct current magnetron sputtering method...
In this study, tantalum nitride (TaN) thin films were deposited on Si(100) and 316L stainless steel ...
Stress evolution during reactive DC magnetron sputtering deposition in TiN, ZrN and TaN films at dif...
Sputter deposited tantalum (Ta) thin films can form in 2 phases: the metastable tetragonal phase ([b...
The main purpose of this work is to present and to interpret the change of structure and physical p...
Thin tantalum nitride layers were sputtered using Linear Dynamic Deposition (LDD) implemented in the...
AbstractThe influence of deposition conditions on the residual stress of sputtered tantalum thin-fil...
The influence of deposition conditions on the residual stress of sputtered tantalum thin-film has be...
In this study, two tantalum nitride-based coatings were synthesized onto Ti-6Al-4V substrates with t...
With rapid growth in the semiconductor industry, the need for optimization of nanofabrication proces...
Tantalum silicon nitride (Ta−Si−N) films were synthesized on Si substrate via magnetron ...
This study focused on the study of the influence of nitrogen content on the microstructure, chemical...