AbstractTungsten trioxide nanostructures, containing WO3 ϵ-phase, were deposited by pulsed laser deposition (PLD) technique on r-plane Al2O3 substrates at room temperature and then annealed at 400 ∘C. Partial oxygen pressure p(O2) was varied from 0.1 mbar to 0.3 mbar. Structural characterization was carried out using XRD, Raman, and HRSEM measurements. Gas sensitivity responses of nanocrystalline sensors were measured for several gases including H2S, H2, NOx, and CO. It was found that the sensor response was dependent on the phase and microstructure of WO3 films
WO3 thin films with peculiar morphology were synthesized using sputtering technique, acid boiling an...
Semiconducting metal oxide based gas sensors usually operate in the temperature range 200-500 °C. In...
AbstractWO3 nanorod based thin films were deposited via pulsed laser deposition onto conductometric ...
AbstractTungsten trioxide nanostructures, containing WO3 ϵ-phase, were deposited by pulsed laser dep...
Nanostructured tungsten trioxide (WO3) thin films are deposited by pulsed laser deposition (PLD) and...
Nanostructured tungsten trioxide (WO3) thin films are deposited by pulsed laser deposition (PLD) and...
Nanostructured tungsten trioxide (WO 3 ) thin films are deposited by pulsed laser deposition (PLD) a...
Nanostructured tungsten trioxide (WO3) thin films are deposited by pulsed laser deposition (PLD) and...
Nanostructured tungsten trioxide (WO3) thin films are deposited by pulsed laser deposition (PLD) and...
Nanostructured tungsten trioxide (WO3) thin films are deposited by pulsed laser deposition (PLD) and...
Layered nanostructures of tungsten trioxide WO3-x about 62 nm thick, with a very thin film of pallad...
Tungsten trioxide is a material with a variety of application areas. For example, the material is us...
Tungsten trioxide (WO3) thin films were grown by pulsed laser deposition (PLD) with the aim to be ap...
WO3 thin films with peculiar morphology were synthesized using sputtering technique, acid boiling an...
WO3 thin films with peculiar morphology were synthesized using sputtering technique, acid boiling an...
WO3 thin films with peculiar morphology were synthesized using sputtering technique, acid boiling an...
Semiconducting metal oxide based gas sensors usually operate in the temperature range 200-500 °C. In...
AbstractWO3 nanorod based thin films were deposited via pulsed laser deposition onto conductometric ...
AbstractTungsten trioxide nanostructures, containing WO3 ϵ-phase, were deposited by pulsed laser dep...
Nanostructured tungsten trioxide (WO3) thin films are deposited by pulsed laser deposition (PLD) and...
Nanostructured tungsten trioxide (WO3) thin films are deposited by pulsed laser deposition (PLD) and...
Nanostructured tungsten trioxide (WO 3 ) thin films are deposited by pulsed laser deposition (PLD) a...
Nanostructured tungsten trioxide (WO3) thin films are deposited by pulsed laser deposition (PLD) and...
Nanostructured tungsten trioxide (WO3) thin films are deposited by pulsed laser deposition (PLD) and...
Nanostructured tungsten trioxide (WO3) thin films are deposited by pulsed laser deposition (PLD) and...
Layered nanostructures of tungsten trioxide WO3-x about 62 nm thick, with a very thin film of pallad...
Tungsten trioxide is a material with a variety of application areas. For example, the material is us...
Tungsten trioxide (WO3) thin films were grown by pulsed laser deposition (PLD) with the aim to be ap...
WO3 thin films with peculiar morphology were synthesized using sputtering technique, acid boiling an...
WO3 thin films with peculiar morphology were synthesized using sputtering technique, acid boiling an...
WO3 thin films with peculiar morphology were synthesized using sputtering technique, acid boiling an...
Semiconducting metal oxide based gas sensors usually operate in the temperature range 200-500 °C. In...
AbstractWO3 nanorod based thin films were deposited via pulsed laser deposition onto conductometric ...