AbstractThe development of novel electromagnetic materials for various applications largely depends on ferrite composites with optimal combination of constituent elements. The evaluation of their dielectric and magnetic properties is important in understanding the physical properties and potential for specific use. In this work, permittivity and permeability spectra of composite materials based on granulated soft magnetic Mn-Zn and Ni-Zn ferrites in paraffin, polyvinyl acetate glue and silicone sealant matrices were investigated for different ferrite phase concentrations and ferrite granule sizes. Mn-Zn ferrites are characterized by a relatively large conductivity and their composites show unusual behavior for the real part of the permittiv...
Experimental studies on the complex susceptibility of soft magnetic composite materials (magnetostri...
This is the final version. Available on open access from Nature Research via the DOI in this recordI...
Nickel-zinc ferrite (Ni0.2Zn0.8Fe2O4) was prepared using conventional solid-state method. It acts as...
AbstractThe development of novel electromagnetic materials for various applications largely depends ...
The complex dielectric permittivity (ε) and magnetic permeability (µ) of Radar Absorbing M...
The dielectric properties of composites based on nickel-zinc-ferrite (NZF) filler can be improved by...
AbstractThe dielectric properties of composites based on nickel-zinc-ferrite (NZF) filler can be imp...
The paper presents the model of ferrite-dielectric (ferroelectric) composites with semiconductive po...
Complex permeability spectra (μ*=μ'-iμ") in Mn-Zn ferrite and its composite materials have been stud...
Composite materials with various ferrite volume fractions were prepared by mixing powders of Ni-Zn f...
Rubber ferrite composites (RFCs) containing powdered nickel zinc ferrite (Ni1 – xZnxFe2O4 ) in a nat...
Summary Method of magnetic spectroscopy is used to analyze and to interpret the experimental data ob...
The dielectric and magnetic behaviour and thermal properties of composites based on nickel–zinc ferr...
Barium ferrite (hard ferrite) and manganese nickel zinc ferrite (soft ferrite) were successfully syn...
The objectives of the proposed work are preparation of ceramic nickel zinc ferrite belonging to the ...
Experimental studies on the complex susceptibility of soft magnetic composite materials (magnetostri...
This is the final version. Available on open access from Nature Research via the DOI in this recordI...
Nickel-zinc ferrite (Ni0.2Zn0.8Fe2O4) was prepared using conventional solid-state method. It acts as...
AbstractThe development of novel electromagnetic materials for various applications largely depends ...
The complex dielectric permittivity (ε) and magnetic permeability (µ) of Radar Absorbing M...
The dielectric properties of composites based on nickel-zinc-ferrite (NZF) filler can be improved by...
AbstractThe dielectric properties of composites based on nickel-zinc-ferrite (NZF) filler can be imp...
The paper presents the model of ferrite-dielectric (ferroelectric) composites with semiconductive po...
Complex permeability spectra (μ*=μ'-iμ") in Mn-Zn ferrite and its composite materials have been stud...
Composite materials with various ferrite volume fractions were prepared by mixing powders of Ni-Zn f...
Rubber ferrite composites (RFCs) containing powdered nickel zinc ferrite (Ni1 – xZnxFe2O4 ) in a nat...
Summary Method of magnetic spectroscopy is used to analyze and to interpret the experimental data ob...
The dielectric and magnetic behaviour and thermal properties of composites based on nickel–zinc ferr...
Barium ferrite (hard ferrite) and manganese nickel zinc ferrite (soft ferrite) were successfully syn...
The objectives of the proposed work are preparation of ceramic nickel zinc ferrite belonging to the ...
Experimental studies on the complex susceptibility of soft magnetic composite materials (magnetostri...
This is the final version. Available on open access from Nature Research via the DOI in this recordI...
Nickel-zinc ferrite (Ni0.2Zn0.8Fe2O4) was prepared using conventional solid-state method. It acts as...