Effects of Fuel Composition on Charge Preparation, Combustion and Knock Tendency in a High Performance GDI Engine. Part II: LES Analysis

AbstractAs discussed in the Part I of this paper, a numerical activity is carried out in order to analyse the effects of fuel composition modelling in a turbocharged GDI engine for sport car applications. While Part I analyses the “ensemble averaged” macroscopic effects on spray evolution, mixture stratification, combustion and knock tendency, in Part II of this paper cycle-to-cycle variations are analysed and discussed using a multi-cycle LES numerical framework, again comparing results from a more traditional single-component fuel surrogate model to those of a multi-component one. A purposely developed numerical approach is applied to properly account for the effects of the Discrete-Continuous-Multi-Component fuel formulation on the charge preparation: just before the spark timing, each vaporized fuel fraction is lumped back into a single-component surrogate fuel to allow the combustion model (ECFM-3Z, in its LES formulation) to take place. At the beginning of a new injection process, the numerical framework for the injected spray is switched back to Multi-Component, thus allowing each fuel fraction to independently spread, vaporize and diffuse in the combustion chamber according to the cycle-specific characteristics. A detailed comparison between the two fuel formulations is carried out on both average and rms values of the most influencing fields just before the spark discharge