Modeling and Simulation of CO2 Capture Process for Coal- based Power Plant Using Amine Solvent in South Korea

AbstractThe interest in carbon capture technology is continuously rising since worldwide climate-change problems have intensified the concern regarding efficient removal of carbon dioxide. Amine-based capture technology is a conventional technology to remove carbon dioxide in natural gas processing, and also can be used for carbon dioxide removal from flue gas in coal-based power plants. In particular, monoethanolamine is a conventional commercial absorbent to remove carbon dioxide and considered as a standard amine absorbent. Due to the high non-ideality of amine, rate-based models have been suggested to describe absorption and desorption of amine absorbent. However, most suggested models were validated against large-scale pilot plant results, and there were few models to consider both absorber and stripper with rate-based model. In this study, we applied two rate-based models introduced by previous literature to the actual pilot plant operation data in 0.1MW-scale Boryeong pilot plant, South Korea and developed a modified model with increased accuracy. The developed model showed good agreements with pilot plant results for both absorber and stripper. However, under low liquid-to-vapor ratio operation with high rich loading value, all model showed worse estimations