AbstractThe gearbox oil and the wind turbine gearbox condition are correlated. The oil can give the wind turbine operator the necessary information to plan maintenance and avoid costly repairs. Therefore, a test bench that can reproduce the gearbox operating conditions would be necessary to test oil-sensors. This paper presents a first testing approach using a Highly Accelerated Life Test / Highly Accelerated Stress Screening test chamber. It allows assessing the performance of oil properties sensors under extreme ambient temperature and vibration levels, based on measurements from a wind turbine gearbox. Results from a test on an oil properties sensor are presented and discussed
A study has been carried out on the feasibility of using nondispersive infra-red (NDIR) analysis for...
This presentation was given at the AWEA Project Performance and Reliability Workshop
© The Institution of Engineering and Technology 2017. Condition monitoring has been widely used to d...
The main objective of this paper is to identify the most relevant aspects for testing oil sensors fo...
Oil condition monitoring is a common practice in the wind industry. However, the published research ...
Oil condition monitoring is a common practice in the wind industry. However, the published research ...
The main driver behind developing advanced condition monitoring (CM) systems for the wind energy ind...
Online Condition Monitoring (CM) is a key technology for the Operation and Maintenance (O&M) of ...
Wind turbine gearbox is a key component in any wind energy conversion system and online monitoring o...
Paper examining condition monitoring wind turbine gearboxes using on-line/in-line oil analysis techn...
The main driver behind developing advanced condition monitoring (CM) systems for the wind energy ind...
Oil monitoring for wind turbine gearboxes can reflect wear and lubrication conditions, and better id...
The electrostatic sensing technique has been verified to be a viable method for tribo-contact monito...
One of the greatest challenges of optimising the correct operation of wind turbines is detecting the...
Paper examining condition monitoring wind turbine gearboxes using on-line/in-line oil analysis techn...
A study has been carried out on the feasibility of using nondispersive infra-red (NDIR) analysis for...
This presentation was given at the AWEA Project Performance and Reliability Workshop
© The Institution of Engineering and Technology 2017. Condition monitoring has been widely used to d...
The main objective of this paper is to identify the most relevant aspects for testing oil sensors fo...
Oil condition monitoring is a common practice in the wind industry. However, the published research ...
Oil condition monitoring is a common practice in the wind industry. However, the published research ...
The main driver behind developing advanced condition monitoring (CM) systems for the wind energy ind...
Online Condition Monitoring (CM) is a key technology for the Operation and Maintenance (O&M) of ...
Wind turbine gearbox is a key component in any wind energy conversion system and online monitoring o...
Paper examining condition monitoring wind turbine gearboxes using on-line/in-line oil analysis techn...
The main driver behind developing advanced condition monitoring (CM) systems for the wind energy ind...
Oil monitoring for wind turbine gearboxes can reflect wear and lubrication conditions, and better id...
The electrostatic sensing technique has been verified to be a viable method for tribo-contact monito...
One of the greatest challenges of optimising the correct operation of wind turbines is detecting the...
Paper examining condition monitoring wind turbine gearboxes using on-line/in-line oil analysis techn...
A study has been carried out on the feasibility of using nondispersive infra-red (NDIR) analysis for...
This presentation was given at the AWEA Project Performance and Reliability Workshop
© The Institution of Engineering and Technology 2017. Condition monitoring has been widely used to d...