Helium and hydrogen synergy effect on irradiation hardening in V-4Cr-4Ti alloys was investigated. The samples were irradiated helium or helium + hydrogen ions at RT (room temperature) and 300 °C. Transmission electron microscopy (TEM) and nano-indentation test were used to investigate the defects and hardness evolution induced by ion irradiation, respectively. The curves for irradiation induced hardness have been analyzed by indentation size effect (ISE) and soft substrate effect (SSE) on the basis of Nix-Gao model and Kasada's method. Point defects appeared after irradiation at RT and dislocation loops and bubbles observed after irradiation at 300 °C were responsible for hardening. The hardness after He + H ions irradiation at RT increased...
An experimental technique to determine the dual-ion irradiation- induced hardening of solid material...
Microstructural and hardening changes of Fe-0.2wt.%V alloy and pure Fe irradiated with 100 keV hydro...
Microstructural and hardening changes of Fe-0.2wt.%V alloy and pure Fe irradiated with 100 keV hydro...
V-4Ti and V samples were irradiated by H/He ions with various energies to produce a damage plateau i...
Abstract The effect of post-irradiation annealing on the microstructures and mechanical properties o...
Ti6Al4V specimens have been irradiated at different temperatures with 200 keV He ions. Micro hardnes...
Irradiation is known to lead to degradation of mechanical properties of materials. Structural materi...
As-received and recrystallized pure tungsten (W) were irradiated with 6.4MeV Fe3+ up to 2dpa with or...
As-received and recrystallized pure tungsten (W) were irradiated with 6.4MeV Fe3+ up to 2dpa with or...
AbstractAs-received and recrystallized pure tungsten (W) were irradiated with 6.4MeV Fe3+ up to 2dpa...
From fifth symposium on engineering problems of fusion research; Princeton, New Jersey, USA (6 Nov 1...
A 45XD TiAl alloy possessing a lamellar microstructure was irradiated using 5MeV helium ions to a fl...
Irradiation hardening of ODS ferritic steels after multi-energy He-ion implantation, or after irradi...
One property of vanadium-base alloys that is not well understood in terms of their potential use as ...
Ferritic/martensitic (FM) steels, F82H and Optimax-A, were irradiated up to 11.3 dpa/1175 appm He in...
An experimental technique to determine the dual-ion irradiation- induced hardening of solid material...
Microstructural and hardening changes of Fe-0.2wt.%V alloy and pure Fe irradiated with 100 keV hydro...
Microstructural and hardening changes of Fe-0.2wt.%V alloy and pure Fe irradiated with 100 keV hydro...
V-4Ti and V samples were irradiated by H/He ions with various energies to produce a damage plateau i...
Abstract The effect of post-irradiation annealing on the microstructures and mechanical properties o...
Ti6Al4V specimens have been irradiated at different temperatures with 200 keV He ions. Micro hardnes...
Irradiation is known to lead to degradation of mechanical properties of materials. Structural materi...
As-received and recrystallized pure tungsten (W) were irradiated with 6.4MeV Fe3+ up to 2dpa with or...
As-received and recrystallized pure tungsten (W) were irradiated with 6.4MeV Fe3+ up to 2dpa with or...
AbstractAs-received and recrystallized pure tungsten (W) were irradiated with 6.4MeV Fe3+ up to 2dpa...
From fifth symposium on engineering problems of fusion research; Princeton, New Jersey, USA (6 Nov 1...
A 45XD TiAl alloy possessing a lamellar microstructure was irradiated using 5MeV helium ions to a fl...
Irradiation hardening of ODS ferritic steels after multi-energy He-ion implantation, or after irradi...
One property of vanadium-base alloys that is not well understood in terms of their potential use as ...
Ferritic/martensitic (FM) steels, F82H and Optimax-A, were irradiated up to 11.3 dpa/1175 appm He in...
An experimental technique to determine the dual-ion irradiation- induced hardening of solid material...
Microstructural and hardening changes of Fe-0.2wt.%V alloy and pure Fe irradiated with 100 keV hydro...
Microstructural and hardening changes of Fe-0.2wt.%V alloy and pure Fe irradiated with 100 keV hydro...