Although there are typical and well-known standard methods for designing hot mix asphalt in the world, there is no unique design method for cold recycled asphalt mixes. The current methods are mainly local or even dependent on technology owners due to the diversity of materials and qualitative control limitations. Currently, most of the design methods are based on 4 inch mold. The major problem of these methods is that in the mix design, the effect of aggregates larger than 25 mm is neglected, while this size of aggregates is used in the recycling projects. Therefore, there is a significant difference between in-situ and laboratory mix behaviors. So, 6-inch mold is used. In this study, a simple mix design has been obtained for reclaimed as...
Cold mix recycling technologies based on asphalt emulsion have been acknowledged for allowing to red...
Technological developments and advances in road construction are increasing with the creation of tec...
A new awareness on sustainable materials and construction techniques is promoting field application...
Although there are typical and well-known standard methods for designing hot mix asphalt in the worl...
Recycling techniques are important tools for rehabilitation of old and deteriorated asphalt pavement...
The process of cold recycling (CR) is becoming method of choice for pavement rehabilitation due to s...
The analysis of national specification documents on mix design for cold recycled materials (CRM) res...
The rehabilitation process of asphalt pavements using the technique of milling and filling can cause...
A field demonstration project was undertaken by the Research & Development Division, Oklahoma Depart...
The Authors present the results of a laboratory investigation which focused on the mix design of col...
Cold in place recycling, as an alternative to milling and standard replacement, shows a series of t...
To maximize the life and quality of a pavement, proper maintenance and rehabilitation are essential....
In the 60s, 70s, and 80s, many Illinois local road agencies successfully used ???conventional??? asp...
The use of reclaimed asphalt pavement (RA) in new asphalt pavements can provide important economical...
Asphalt concrete (AC) recycling is probably the most cost-effective technique for the rehabilitation...
Cold mix recycling technologies based on asphalt emulsion have been acknowledged for allowing to red...
Technological developments and advances in road construction are increasing with the creation of tec...
A new awareness on sustainable materials and construction techniques is promoting field application...
Although there are typical and well-known standard methods for designing hot mix asphalt in the worl...
Recycling techniques are important tools for rehabilitation of old and deteriorated asphalt pavement...
The process of cold recycling (CR) is becoming method of choice for pavement rehabilitation due to s...
The analysis of national specification documents on mix design for cold recycled materials (CRM) res...
The rehabilitation process of asphalt pavements using the technique of milling and filling can cause...
A field demonstration project was undertaken by the Research & Development Division, Oklahoma Depart...
The Authors present the results of a laboratory investigation which focused on the mix design of col...
Cold in place recycling, as an alternative to milling and standard replacement, shows a series of t...
To maximize the life and quality of a pavement, proper maintenance and rehabilitation are essential....
In the 60s, 70s, and 80s, many Illinois local road agencies successfully used ???conventional??? asp...
The use of reclaimed asphalt pavement (RA) in new asphalt pavements can provide important economical...
Asphalt concrete (AC) recycling is probably the most cost-effective technique for the rehabilitation...
Cold mix recycling technologies based on asphalt emulsion have been acknowledged for allowing to red...
Technological developments and advances in road construction are increasing with the creation of tec...
A new awareness on sustainable materials and construction techniques is promoting field application...