Drying quality and colour of subfossil oak from central Serbia

The subject of this paper is the analysis of the quality of natural and conventional drying of subfossil oak wood. In addition to the drying quality, the colour of this material, as well as the effect of the drying process on colour change have been tested. The subfossil oak logs that were used in this experiment originate from the Morava River in Central Serbia. After sawing, timber was air-dried to about 20% moisture content (MC) followed by kiln-drying to 9.5% MC. By examining the quality of air-drying of the subfossil oak wood, a high presence of cracks was found, as well as the inaccuracy of humidity measurement using electric moisture meters. The stack for kiln-drying consisted of 24 boards, of which 4 were used for the monitoring of MC and MC distribution across the thickness of plank during drying. Drying quality was evaluated after the kiln-drying process. Although mild drying conditions during kiln-drying were applied, the gap as a measure of case-hardening had a value greater than usual for oak of same thickness. It was found that the drying process has no significant effect on the change in the colour of subfossil wood. The colour of the subfossil oak wood was significantly darker than the usual oak wood, and the colour difference between the central and the outer parts of the trunk of the subfossil oak was determined