Researches regarding introducing temperature as a factor in cutting tool wear monitoring

Monitoring the tool state during the cutting process becomes very important since the introduction of CAM in manufacturing process. The tool life based only on economic data is not enough especially in the case precision cutting due to the scattering of tool wear which depends on much more mechanical and physical properties of the workpiece and tool materials. Attempts to assess the state of wear of the tool by direct measurement of the wear indicators have been unsuccessful due to difficult access in the cutting zone and measurement imprecision. We have so wear patterns appreciation by measuring indirect indicators of wear, the main models are based on measuring vibration, acoustic emission or cutting forces and power consumption separately or together. These models have the disadvantage that should be followed at least two indicators simultaneously for a minimum precision of the results. Considering the wear models developed over time it can be seen that there is a clear relationship between wear and stabilized temperature. The paper aims to study the introduction temperature as indirect indicator of tool state in addition to the existing indicators, this leads to increased reliability of results of monitoring of wear