We have made investigations of the phase formation and microstructure on the ceramics obtained from a starting nanopowder mixture with the weight ratio ZnO : TiO2 = 4 : 1. Ceramic is obtained at different sintering temperatures, namely, 948, 1223 and 1473 К. Using the characterization methods of electron microscopy, energy dispersive microanalysis and X-ray diffraction phase analysis it has been shown that the ceramics structure is consisted of two dispersed phases of Zn2TiO4 and ZnO with the grain sizes being in range 0,5-1 μm. It has been found also that, at ceramic`s sintering temperature of 1223 К, the solid phase interactions are completed with the structure ZnO : Zn2TiO4 ≈ 1 : 1,5 phase ratio
Investigations of a ZnO-TiO2 binary oxide mixture during mechanical treatment were mainly focused on...
ed with titanium at 15501C/30 min. The interface was charac-terized by analytical transmission micro...
In this research, we have synthesized nanocrystalline titanium dioxide (TiO 2) ceramic powder throug...
We have made investigations of the phase formation and microstructure on the ceramics obtained from ...
Текст статьи не публикуется в открытом доступе в соответствии с политикой журнала
Densification rate and phase structure changes during sintering of nanosized ZnTiO3 were studied. Si...
Текст статьи не публикуется в открытом доступе в соответствии с политикой журнала
Complex compounds with oxide phases of Ba, 2n, and 11 are widely used in instrument engineering. It ...
The aim of this work was an investigation of structural and electrical properties of sintered zinc-t...
Pure titania, zirconia, and mixed oxides (3-37 mol.% of ZrO2) are prepared using the sol-gel method ...
In this work, the ZnO-TiO2 mixed phase nanoparticles were prepared by solid state reaction method...
AbstractDevelopment of dielectric materials for microwave frequencies is increasing with rapid progr...
We show the efficiency in the preparation of 95% dense ZnO ceramics by cold sintering process throug...
Pure titania, zirconia, and mixed oxides (3\u201437 mol.% of ZrO2) are prepared using the sol-gel me...
Mixed Ta2O5 – TiO2 binary system was studied by a combination of differential thermal analysis (DTA)...
Investigations of a ZnO-TiO2 binary oxide mixture during mechanical treatment were mainly focused on...
ed with titanium at 15501C/30 min. The interface was charac-terized by analytical transmission micro...
In this research, we have synthesized nanocrystalline titanium dioxide (TiO 2) ceramic powder throug...
We have made investigations of the phase formation and microstructure on the ceramics obtained from ...
Текст статьи не публикуется в открытом доступе в соответствии с политикой журнала
Densification rate and phase structure changes during sintering of nanosized ZnTiO3 were studied. Si...
Текст статьи не публикуется в открытом доступе в соответствии с политикой журнала
Complex compounds with oxide phases of Ba, 2n, and 11 are widely used in instrument engineering. It ...
The aim of this work was an investigation of structural and electrical properties of sintered zinc-t...
Pure titania, zirconia, and mixed oxides (3-37 mol.% of ZrO2) are prepared using the sol-gel method ...
In this work, the ZnO-TiO2 mixed phase nanoparticles were prepared by solid state reaction method...
AbstractDevelopment of dielectric materials for microwave frequencies is increasing with rapid progr...
We show the efficiency in the preparation of 95% dense ZnO ceramics by cold sintering process throug...
Pure titania, zirconia, and mixed oxides (3\u201437 mol.% of ZrO2) are prepared using the sol-gel me...
Mixed Ta2O5 – TiO2 binary system was studied by a combination of differential thermal analysis (DTA)...
Investigations of a ZnO-TiO2 binary oxide mixture during mechanical treatment were mainly focused on...
ed with titanium at 15501C/30 min. The interface was charac-terized by analytical transmission micro...
In this research, we have synthesized nanocrystalline titanium dioxide (TiO 2) ceramic powder throug...