Fundamental principles of an effective reinforcing roof bolting strategy in horizontally layered roof strata and areas of potential improvement

It is arguable that the development of reinforcing roof bolting systems has largely stagnated in recent times, primarily due to the prevailing industry view that few, if any, further improvements can be made to what currently exists. However, this paper contends that reinforcing roof bolting systems can be further refined by considering both the specific manner by which horizontally bedded roof strata loses its natural self-supporting ability and the specific means by which reinforcing roof bolts act to promote or retain this natural self-supporting ability. The Australian coal industry has insisted on minimising bolt-hole diameter to maximise load transfer and on targeting full-encapsulation by any means necessary for many years. This has led to a significant, albeit unintended, consequence in terms of overall roof bolting effectiveness, namely increased resin pressures during bolt installation and the associated potential for opening bedding planes that may have, otherwise, remained closed during the bolt installation process. Given that the natural self-supporting ability of roof strata is strongly linked to whether bedding planes are open or closed, logically, minimising resin pressures should be a significant benefit. This paper focuses primarily on three key issues that relate directly to the function of the roof bolting system itself: (1) the importance of proper resin mixing in the context of maximising load transfer strength and stiffness, (2) the importance of minimising resin pressures developed during bolt installation, and (3) the importance of maximising the effectiveness of the available bolt pre-tension. All mine operators should be invested in improving the individual effectiveness of each installed roof bolt, even by relatively small incremental amounts, so this is an important topic for discussion within the mining community. Keywords: Roof bolts, Strata reinforcement, Partial-encapsulation, Pre-tension, Resin mixing, Improved bolt effectivenes