Abstract In this work, the influence of carbon nanotube (CNT) hybridization on ultraviolet (UV) and gas sensing properties of individual and networked ZnO nanowires (NWs) is investigated in detail. The CNT concentration was varied to achieve optimal conditions for the hybrid with improved sensing properties. In case of CNT decorated ZnO nanonetworks, the influence of relative humidity (RH) and applied bias voltage on the UV sensing properties was thoroughly studied. By rising the CNT content to about 2.0 wt% (with respect to the entire ZnO network) the UV sensing response is considerably increased from 150 to 7300 (about 50 times). With respect to gas sensing, the ZnO-CNT networks demonstrate an excellent selectivity as well as a high gas r...
Nanocomposites formed by aluminum-doped zinc oxide nanoparticles (AZO–NP) and multiwall carbon nanot...
This article provides an overview of the recent development of ZnO nanowires (NWs) for chemoresistiv...
Abstract We demonstrate a facile way to fabricate an array of gate-controllable UV sensors based on ...
Solid state chemical sensors are gaining popularity and finding extensive use in process control, en...
The low operating temperature of nanowire gas sensors along with their high surface-to-volume ratio ...
In this study, ZnO nanorods (NRs) are grown on the ZnO seed layer incorporating carbon nanotubes (CN...
ZnO nanowires are synthesised on a patterned substrate in order to see the response to different gas...
We investigated the noise and photoresponse characteristics of various optical transparencies of nan...
The aim of this investigation is to develop a material and technique for detects the smallest traces...
The overall objective of this work is the development of a high density sensor array using singe wal...
We report sensing properties of functionalized single walled carbon nanotubes (f-SWCNTs) deposited o...
In this PhD thesis, vertical arrays of zinc oxide (ZnO) nanowires (NWs) are synthesized in a CVD sys...
Special Issue "Semiconductor Nanowires: From Synthesis and Characterization to Devices"International...
This paper presents a novel atomic layer deposition (ALD) based ZnO functionalization of surface pre...
Nanocomposites formed by aluminum-doped zinc oxide nanoparticles (AZO–NP) and multiwall carbon nanot...
This article provides an overview of the recent development of ZnO nanowires (NWs) for chemoresistiv...
Abstract We demonstrate a facile way to fabricate an array of gate-controllable UV sensors based on ...
Solid state chemical sensors are gaining popularity and finding extensive use in process control, en...
The low operating temperature of nanowire gas sensors along with their high surface-to-volume ratio ...
In this study, ZnO nanorods (NRs) are grown on the ZnO seed layer incorporating carbon nanotubes (CN...
ZnO nanowires are synthesised on a patterned substrate in order to see the response to different gas...
We investigated the noise and photoresponse characteristics of various optical transparencies of nan...
The aim of this investigation is to develop a material and technique for detects the smallest traces...
The overall objective of this work is the development of a high density sensor array using singe wal...
We report sensing properties of functionalized single walled carbon nanotubes (f-SWCNTs) deposited o...
In this PhD thesis, vertical arrays of zinc oxide (ZnO) nanowires (NWs) are synthesized in a CVD sys...
Special Issue "Semiconductor Nanowires: From Synthesis and Characterization to Devices"International...
This paper presents a novel atomic layer deposition (ALD) based ZnO functionalization of surface pre...
Nanocomposites formed by aluminum-doped zinc oxide nanoparticles (AZO–NP) and multiwall carbon nanot...
This article provides an overview of the recent development of ZnO nanowires (NWs) for chemoresistiv...
Abstract We demonstrate a facile way to fabricate an array of gate-controllable UV sensors based on ...