Enhancement of Image Quality in LCD by Doping γ-Fe₂O₃ Nanoparticles and Reducing Friction Torque Difference

Improving image sticking in liquid crystal display (LCD) has attracted tremendous interest because of its potential to enhance the quality of the display image. Here, we proposed a method to evaluate the residual direct current (DC) voltage by varying liquid crystal (LC) cell capacitance under the combined action of alternating current (AC) and DC signals. This method was then used to study the improvement of image sticking by doping γ-Fe2O3 nanoparticles into LC materials and adjusting the friction torque difference of the upper and lower substrates. Detailed analysis and comparison of residual characteristics for LC materials with different doping concentrations revealed that the LC material, added with 0.02 wt% γ-Fe2O3 nanoparticles, can absorb the majority of free ions stably, thereby reducing the residual DC voltage and extending the time to reach the saturated state. The physical properties of the LC materials were enhanced by the addition of a small amount of nanoparticles and the response time of doping 0.02 wt% γ-Fe2O3 nanoparticles was about 10% faster than that of pure LC. Furthermore, the lower absolute value of the friction torque difference between the upper and lower substrates contributed to the reduction of the residual DC voltage induced by ion adsorption in the LC cell under the same conditions. To promote the image quality of different display frames in the switching process, we added small amounts of the nanoparticles to the LC materials and controlled friction technology accurately to ensure the same torque. Both approaches were proven to be highly feasible