Aluminum and aluminum alloys have the advantage of a high strength-to-weight ratio, but their low hardness and poor wear resistance often cause wear damage. In the present study, the cladding layer was prepared using argon-shielded arc cladding of CuZn40-WC powders which were pre-coated on a pure aluminum substrate. The effects of WC proportion on the morphology, microstructure, and properties of cladding layers were investigated in detail. The results indicated that the optimal WC proportion in CuZn40-WC powders was 60 wt.%. With the increase of WC proportion, although the morphology of the cladding layer became slightly worse, the surface quality of the cladding layer was acceptable for industrial application until the WC proportion was 8...
In this study, four protective coating materials: Inconel 718, Inconel 625, Alloy 33 and Stellite 6 ...
The paper presents experimental research regarding the wear behavior of some composite materials bas...
Although magnesium alloys possess a set of desirable properties such as low specific weight and high...
Aluminum and aluminum alloys have the advantage of a high strength-to-weight ratio, but their low ha...
A TiN and TiN·Ti2Cu reinforced copper matrix composite layer was cladded onto a T3 copper substrate ...
This work deals with the wear performance of clad layers, which clad WC and TiC powders on medium ca...
Hardfacing layers on mild steel substrates were successfully manufactured using a plasma transferred...
The Al/Zn-enriched surface layers were fabricated on Mg substrate by heating the specimens in contac...
420/WC-17Co coating was deposited on AZ80 magnesium alloy substrate by cold spraying technology. SEM...
233-242The aim of this work is to evaluate the role of tungsten carbide (WC) in increasing the hardn...
To promote the application of magnesium alloys for reducing the weight of the engineering components...
Ni–Co duplex coatings were cladded onto Cu to improve the antiwear properties of Cu products. Prior ...
Aluminium bronze alloys (Cu-Al-Fe) with Al > 14 wt. % are known to have high wear resistance and ...
Cu-Al-Fe aluminium bronze alloys are good candidates for precious tools and forming dies due to thei...
This paper investigated the effect of tungsten arc melting current on the microstructure and wear re...
In this study, four protective coating materials: Inconel 718, Inconel 625, Alloy 33 and Stellite 6 ...
The paper presents experimental research regarding the wear behavior of some composite materials bas...
Although magnesium alloys possess a set of desirable properties such as low specific weight and high...
Aluminum and aluminum alloys have the advantage of a high strength-to-weight ratio, but their low ha...
A TiN and TiN·Ti2Cu reinforced copper matrix composite layer was cladded onto a T3 copper substrate ...
This work deals with the wear performance of clad layers, which clad WC and TiC powders on medium ca...
Hardfacing layers on mild steel substrates were successfully manufactured using a plasma transferred...
The Al/Zn-enriched surface layers were fabricated on Mg substrate by heating the specimens in contac...
420/WC-17Co coating was deposited on AZ80 magnesium alloy substrate by cold spraying technology. SEM...
233-242The aim of this work is to evaluate the role of tungsten carbide (WC) in increasing the hardn...
To promote the application of magnesium alloys for reducing the weight of the engineering components...
Ni–Co duplex coatings were cladded onto Cu to improve the antiwear properties of Cu products. Prior ...
Aluminium bronze alloys (Cu-Al-Fe) with Al > 14 wt. % are known to have high wear resistance and ...
Cu-Al-Fe aluminium bronze alloys are good candidates for precious tools and forming dies due to thei...
This paper investigated the effect of tungsten arc melting current on the microstructure and wear re...
In this study, four protective coating materials: Inconel 718, Inconel 625, Alloy 33 and Stellite 6 ...
The paper presents experimental research regarding the wear behavior of some composite materials bas...
Although magnesium alloys possess a set of desirable properties such as low specific weight and high...