Experimental and Numerical Study on the Seismic Performance of Prefabricated Reinforced Masonry Shear Walls

The seismic performance of prefabricated reinforced concrete block masonry shear walls (PRMSWs) was studied. Five PRMSWs were tested under cyclic loading to evaluate the effect of the axial compression ratio and the distribution of the vertical rebar on the inelastic behavior. Based on the experimental results, the lateral load capacity, failure mode, lateral drift, ductility, stiffness degradation, energy dissipation, and the seismic performance stability of the specimens were analyzed. The finite element analysis of the specimens was conducted with ABAQUS, which agreed quite well with the laboratory findings. Relevant results showed that PRMSW exhibited favorable ductility and energy dissipation. The increase of the compression ratio led to stiffer, but more brittle, inelastic behavior of the specimens that had higher flexural strength. The shear walls that had concentrated vertical rebar at the sides exhibited relatively higher load capacity and less ductility compared to the walls that had evenly distributed rebar. The inelastic lateral drift limit of the PRMSW could be assigned 1/120. The equivalent viscous damping ratio of the PRMSW was 9–13% at ultimate load. These results provide a technical basis for the design and application of the PRMSW structures