Tribological coatings made of MoS2 and WSe2 phases and their corresponding combinations with tungsten carbide (WC) were prepared by non-reactive magnetron sputtering of individual targets of similar composition. A comparative tribological analysis of these multiphase coatings was done in both ambient air (30–40% relative humidity, RH) and dry nitrogen (RH<7%) environments using the same tribometer and testing conditions. A nanostructural study using advanced transmission electron microscopy of the initial coatings and examination of the counterfaces after the friction test using different analytical tools helped to elucidate what governs the tribological behavior for each type of environment. This allowed conclusions to be made about the in...
Layered transition metal dichalcogenides (TMD) such as WS2 are materials well-known for their solid ...
Transition metal dichalcogenides (TMD) have been one of the best alternatives as low friction coatin...
Tribological properties of MoS2/C coatings with different carbon contents (44.7-84.3 at.%) deposited...
Tribological coatings made of MoS2 and WSe2 phases and their corresponding combinations with tungst...
In this paper we have investigated the tribological properties of solid lubricant coatings from Mo2S...
Tungsten disulphide (WS2) and molybdenum disulphide (MoS2), which belong to the family of transition...
W-S-N coatings deposited by reactive magnetron sputtering offer the possibility of ultra-low frictio...
Transition metal dichalcogenides are well known for their lubricating properties. MoS2 is the most p...
© 2015 American Chemical Society. Transition metal chalcogenides with lamellar structure are known f...
Layered transition metal dichalcogenides (TMD) such as WS2 are well-known materials for their solid ...
AbstractW–S–N coatings deposited by reactive magnetron sputtering offer the possibility of ultra-low...
Low friction applications in space and aerospace sectors have attracted the use of solid lubricants ...
Fullerene-like MoS2 and WS2 nanoparticles can be used as building blocks for the fabrication of flui...
Layered transition metal dichalcogenides (TMD) such as WS2 are materials well-known for their solid ...
WSex films with variable Se/W ratio were deposited by non-reactive r.f. magnetron sputtering from WS...
Layered transition metal dichalcogenides (TMD) such as WS2 are materials well-known for their solid ...
Transition metal dichalcogenides (TMD) have been one of the best alternatives as low friction coatin...
Tribological properties of MoS2/C coatings with different carbon contents (44.7-84.3 at.%) deposited...
Tribological coatings made of MoS2 and WSe2 phases and their corresponding combinations with tungst...
In this paper we have investigated the tribological properties of solid lubricant coatings from Mo2S...
Tungsten disulphide (WS2) and molybdenum disulphide (MoS2), which belong to the family of transition...
W-S-N coatings deposited by reactive magnetron sputtering offer the possibility of ultra-low frictio...
Transition metal dichalcogenides are well known for their lubricating properties. MoS2 is the most p...
© 2015 American Chemical Society. Transition metal chalcogenides with lamellar structure are known f...
Layered transition metal dichalcogenides (TMD) such as WS2 are well-known materials for their solid ...
AbstractW–S–N coatings deposited by reactive magnetron sputtering offer the possibility of ultra-low...
Low friction applications in space and aerospace sectors have attracted the use of solid lubricants ...
Fullerene-like MoS2 and WS2 nanoparticles can be used as building blocks for the fabrication of flui...
Layered transition metal dichalcogenides (TMD) such as WS2 are materials well-known for their solid ...
WSex films with variable Se/W ratio were deposited by non-reactive r.f. magnetron sputtering from WS...
Layered transition metal dichalcogenides (TMD) such as WS2 are materials well-known for their solid ...
Transition metal dichalcogenides (TMD) have been one of the best alternatives as low friction coatin...
Tribological properties of MoS2/C coatings with different carbon contents (44.7-84.3 at.%) deposited...