Insulation systems for buildings and structures based on expanded polyethylene

Insulation systems for buildings and structures imply the use of efficient thermal insulation products based on mineral wool, expanded polystyrene, expanded polyurethane, etc. For a long time, products from non-cross-linked expanded polyethylene were used as insulation for pipelines, reflective insulation, protection against air infiltration, etc. Modern technologies and engineering solutions allowed widening the field of application of non-cross-linked expanded polyethylene (NXLPE) as a construction insulation material. In particular, we can consider a complex of insulation systems for walls, floors and a pitched roof, which allows to form a fully insulating shell of a low-rise building, e.g. a cottage. The novelty of the patented technology Tepofol® and that of the material concerned in comparison with the known solutions is the development of a rolled material based on NXLPE (20 to 150 mm thick) with a lock joint, as well as the technology of seamless connection of individual heat-insulating cloths. The rolls of NXLPE are mechanically fixed to the frame and connected with the lock. One of the advantages of expanded polyethylene, which only few insulating materials possess, is the possibility of forming seamless insulating shells. The article considers a number of insulation systems based on the use of products from expanded polyethylene. In particular, these are the systems of insulation of the walls of frame buildings, the insulation of floors, as well as the insulation of logistics facilities and hangars