To obtain reaction zone parameters for several high explosives, experimental measurements of the detonation wave profiles in HMX-, RDX- and PETN-based explosives were performed using photon Doppler velocimetry (PDV). Planar detonations were produced by impacting the explosive with a sapphire flyer in a gas gun. Particle velocity wave profiles were measured at the explosive/window interface. LiF windows with very thin vapor-deposited aluminum mirrors were used for experiments. All measurements show a distinct end to the reaction zone, indicating a Chapman-Jouguet (CJ) point. For HMX-based explosives, the presented measurements show that the fast reaction time is approximately 10±2 ns, whereas for RDX- and PETN-based explosives, the values ar...
The authors have used an embedded electromagnetic particle velocity gauge technique to measure the s...
AbstractWe present an experimental investigation of the dynamics of rod impact on bare or uncovered ...
The sonic reaction zone length may be measured by four methods: (1) size effect, (2) detonation fron...
Detonation wave profiles have been measured in several HMX based plastic bonded explosives including...
We report results of the experimental measurements of the detonation wave profile of the TATB based ...
Experimental measurements using nanosecond time resolved embedded gauges and laser interferometric t...
The paper describes a method for characterization of detonator output using photonic Doppler velocim...
Lead azide (LA) is a commonly used primary explosive, the detonation growth of which is difficult to...
The laser interferometric system VISAR was used to investigate the detonation waves structure of pre...
Author Institution: Sandia National LaboratoriesAuthor Institution: Los Alamos National LaboratorySl...
A Photon Doppler Velocimeter (PDV) was built for explosives research. The PDV is comprised of a 1550...
Abstract: The paper describes the measurement of cylindrical charge wall velocity profiles at variou...
The reaction rate of an explosive – also called detonation velocity – is the easiest parameter to me...
PlSEM is a plastic explosive based on RDX, PETN and non-explosive binder used in linear shaped charg...
We have used an embedded electromagnetic particle velocity gauge technique to measure the shock init...
The authors have used an embedded electromagnetic particle velocity gauge technique to measure the s...
AbstractWe present an experimental investigation of the dynamics of rod impact on bare or uncovered ...
The sonic reaction zone length may be measured by four methods: (1) size effect, (2) detonation fron...
Detonation wave profiles have been measured in several HMX based plastic bonded explosives including...
We report results of the experimental measurements of the detonation wave profile of the TATB based ...
Experimental measurements using nanosecond time resolved embedded gauges and laser interferometric t...
The paper describes a method for characterization of detonator output using photonic Doppler velocim...
Lead azide (LA) is a commonly used primary explosive, the detonation growth of which is difficult to...
The laser interferometric system VISAR was used to investigate the detonation waves structure of pre...
Author Institution: Sandia National LaboratoriesAuthor Institution: Los Alamos National LaboratorySl...
A Photon Doppler Velocimeter (PDV) was built for explosives research. The PDV is comprised of a 1550...
Abstract: The paper describes the measurement of cylindrical charge wall velocity profiles at variou...
The reaction rate of an explosive – also called detonation velocity – is the easiest parameter to me...
PlSEM is a plastic explosive based on RDX, PETN and non-explosive binder used in linear shaped charg...
We have used an embedded electromagnetic particle velocity gauge technique to measure the shock init...
The authors have used an embedded electromagnetic particle velocity gauge technique to measure the s...
AbstractWe present an experimental investigation of the dynamics of rod impact on bare or uncovered ...
The sonic reaction zone length may be measured by four methods: (1) size effect, (2) detonation fron...