Abstract The relaxation behaviors of thin polymer films show a strong dependence on temperature and film thickness. Direct quantitative detection of the relaxation behaviors of thin polymer films at nanometer scale by traditional instruments is however challenging. In this study, we employed atomic force microscopy (AFM)-based force-distance curve to study the relaxation dynamics and the film thickness dependence of glass transition temperature (T g ) for normal thin polystyrene (PS) films supported on silicon substrate. The adhesion force (Fad) between AFM tip and normal thin PS film surfaces was quantitatively detected in situ under the variation of temperature and film thickness. The T g of normal thin PS film was successfully obtained b...
Understanding the mechanical properties of polymers at the nanoscale is critical in numerous emergin...
We present a comprehensive study of gold nanoparticle embedding into polystyrene (PS) surfaces at te...
This thesis focuses on how the properties of polymer thin films depend on the film thickness and mol...
By performing Atomic Force Microscopy measurements of pull-off force as a function of the temperatur...
Abstract The rapid development of nanoscience and nanotechnology involves polymer films with thickne...
The viscoelastic properties of thin polystyrene (PS) films depend on confinement, as it can modify t...
The nanoconfinement effects in polymer thin film have been a major interest in past decades. It was ...
Measurements of the optical birefringence were used to probe the relaxation of rubbed ultrathin poly...
Composites with polymer surface layer serving as a matrix for metal nanoparticles stabilization are ...
In this thesis, Reflectance Difference Spectroscopy (RDS) was used as a primary tool for the measure...
Optical retardation measurements were used to probe the chain relaxation dynamics in rubbed polystyr...
The surface glass transition temperature, Tg, of several amorphous polystyrene (PS) samples each wit...
The surfaces of polymer and interfaces between polymer and inorganic particles are of particular imp...
In this article the measurement and understanding of friction forces and surface dynamics of polymer...
We have used a quartz crystal microbalance to monitor the adhesion of small particles to the surface...
Understanding the mechanical properties of polymers at the nanoscale is critical in numerous emergin...
We present a comprehensive study of gold nanoparticle embedding into polystyrene (PS) surfaces at te...
This thesis focuses on how the properties of polymer thin films depend on the film thickness and mol...
By performing Atomic Force Microscopy measurements of pull-off force as a function of the temperatur...
Abstract The rapid development of nanoscience and nanotechnology involves polymer films with thickne...
The viscoelastic properties of thin polystyrene (PS) films depend on confinement, as it can modify t...
The nanoconfinement effects in polymer thin film have been a major interest in past decades. It was ...
Measurements of the optical birefringence were used to probe the relaxation of rubbed ultrathin poly...
Composites with polymer surface layer serving as a matrix for metal nanoparticles stabilization are ...
In this thesis, Reflectance Difference Spectroscopy (RDS) was used as a primary tool for the measure...
Optical retardation measurements were used to probe the chain relaxation dynamics in rubbed polystyr...
The surface glass transition temperature, Tg, of several amorphous polystyrene (PS) samples each wit...
The surfaces of polymer and interfaces between polymer and inorganic particles are of particular imp...
In this article the measurement and understanding of friction forces and surface dynamics of polymer...
We have used a quartz crystal microbalance to monitor the adhesion of small particles to the surface...
Understanding the mechanical properties of polymers at the nanoscale is critical in numerous emergin...
We present a comprehensive study of gold nanoparticle embedding into polystyrene (PS) surfaces at te...
This thesis focuses on how the properties of polymer thin films depend on the film thickness and mol...