Analysis and experiments of the effect of reinforcement of wood beam using carbon fiber reinforced polymer against bending strength

Flexural reinforcement on wood beams is intended to increase the maximum load capacity that can be supported by wood beams until they are collapse. One of the most widely used resilient reinforcements currently used is reinforcement using Carbon Fiber Reinforced Polymer (CFRP) which is a combination of high strength with light weight material. This reinforcement is intended for historical buildings that need more load capacity that can be supported due to changes in building function, or the increase of the load on the building. The purpose of this research is to know the effect of reinforcement of wood beams with CFRP and variation of length of reinforcement to flexible strength of wood beams, and beam behavior reinforced with CFRP due to loading. Structural beam testing using mahogany logs with cross sectional size 75x100mm2 along 2 m consisting of 4 types of samples with each type consists of 2 pieces of sample. The first sample was a wood beams without reinforcement, the second sample was a wood beams with a reinforcing length of ¼ spans in the middle, a third sample was a wood beams with a reinforcing length ¾ spans in the middle, and a fourth sample was a wood beams with retrofitting along the length of the span. From the test it is found that the maximum load increase that can be supported by the sample with the length of reinforcement ¼ span, ¾ span, and along the span has increased the maximum load respectively that is 4.393%, 37.340%, and 48.323% compared to wood beams without reinforcement. The average damage occurring in samples with CFRP is debonding failure