In this study, closure relations for total and turbulent convection fluxes of flame surface density and scalar dissipation rate were developed (i) by placing the focus of consideration on the flow velocity conditioned to the instantaneous flame within the mean flame brush and (ii) by considering the limiting behavior of this velocity at the leading and trailing edges of the flame brush. The model was tested against direct numerical simulation (DNS) data obtained from three statistically stationary, one-dimensional, planar, premixed turbulent flames associated with the flamelet regime of turbulent burning. While turbulent fluxes of flame surface density and scalar dissipation rate, obtained in the DNSs, showed the countergradient behavior, t...
Transport equations for reaction rate W and its Favre-averaged value W̃ are derived from first princ...
The characteristics of the scalar dissipation rate transport in the corrugated flamelets and the thi...
The linear relation between the mean rate of product creation and the mean scalar dissipation rate, ...
In this study, closure relations for total and turbulent convection fluxes of flame surface density ...
International audienceThe present work aims at modeling the entire convection flux ρuW¯ in the trans...
In order to determine the mean rate of product creation within the framework of the Turbulent Flame ...
First, the following universal feature of premixed turbulent flame dynamics is highlighted: During a...
Density and velocity are measured simultaneously for the first time in premixed turbulent flames usi...
Paper I-III focuse on the problem to validate models for premixed turbulent flames. The main result...
DoctorThe turbulent burning velocity, ST represents the propagating characteristics of a turbulent f...
One central ingredient in flamelet models for turbulent premixed combustion is the flame surface den...
A simple model is proposed to evaluate (a) the divergence of velocity vector conditioned on unburned...
Lean premixed combustion has potential for reducing emissions from combustion devices without compro...
Recently, a simple model for evaluating turbulent scalar flux in premixed flames was developed and v...
Current flamelot models based on a description of the flame surface dynamics require the closure of ...
Transport equations for reaction rate W and its Favre-averaged value W̃ are derived from first princ...
The characteristics of the scalar dissipation rate transport in the corrugated flamelets and the thi...
The linear relation between the mean rate of product creation and the mean scalar dissipation rate, ...
In this study, closure relations for total and turbulent convection fluxes of flame surface density ...
International audienceThe present work aims at modeling the entire convection flux ρuW¯ in the trans...
In order to determine the mean rate of product creation within the framework of the Turbulent Flame ...
First, the following universal feature of premixed turbulent flame dynamics is highlighted: During a...
Density and velocity are measured simultaneously for the first time in premixed turbulent flames usi...
Paper I-III focuse on the problem to validate models for premixed turbulent flames. The main result...
DoctorThe turbulent burning velocity, ST represents the propagating characteristics of a turbulent f...
One central ingredient in flamelet models for turbulent premixed combustion is the flame surface den...
A simple model is proposed to evaluate (a) the divergence of velocity vector conditioned on unburned...
Lean premixed combustion has potential for reducing emissions from combustion devices without compro...
Recently, a simple model for evaluating turbulent scalar flux in premixed flames was developed and v...
Current flamelot models based on a description of the flame surface dynamics require the closure of ...
Transport equations for reaction rate W and its Favre-averaged value W̃ are derived from first princ...
The characteristics of the scalar dissipation rate transport in the corrugated flamelets and the thi...
The linear relation between the mean rate of product creation and the mean scalar dissipation rate, ...