Thin films of (Cu2S)100-x( SnS2 )x at X=[ 30,40, &50)]% with thickness (0.9±0.03)µm , had been prepared by chemical spray pyrolysis method on glass substrates at 573 K. These films were then annealed under low pressure of(10-2) mbar ,373)423&473)K for one hour . This research includes , studying the the optical properties of (Cu2S)100-x-(SnS2)x at X=[ 30,40, &50)]% .Moreover studying the effect of annealing on their optical properties , in order to fabricate films with high stability and transmittance that can be used in solar cells. The transmittance and absorbance spectra had been recorded in the wavelength range (310 - 1100) nm in order to study the optical properties . It was found that these films had direct optical band gap which...
Tin disulphide (SnS2) thin films has been prepared on glass substrates by chemical spray pyrolysis t...
Polycrystalline copper sulphide (CuxS) thin films were grown by ultrasonic spray pyrolysis method us...
Thin films of Copper Tin Selenide (Cu2SnSe3), were successfully deposited on well-cleaned glass subs...
Thin films of (Cu2S)100-x( SnS2 )x at X=[ 30,40, &50)]% with thickness (0.9±0.03)µm , had been prepa...
Thin filis have been prepared from the tin disulphide (SnS2 ), the pure and the doped with copper ...
AbstractCopper sulphide CuS was deposited on three substrates; glass, Indium Tin Oxide (ITO) and Ti ...
The Cu 2 S and SnS 2 layers have been prepared by the chemical bath deposition method. The results o...
Thin films of copper sulfide (CuS) with various molarities values of Cu concentrations (0.2,0.3,0.4...
Thin films of SnS2 were prepared, as the absorber layer in solar cells, using an aqueous solution of...
Recent reports shows that tin sulphide (SnS) is a promising material as an absorber layer in solar c...
At this work, nanostructure copper sulfide (CuS) thin films at different temperature of substrate an...
Tin Sulphide (SnS) thin films have been deposited on glass slides by thermal evaporation using SnS p...
A research on the deposition and Characterization of SnS Thin Films by Chemical Bath Deposition Tech...
Ternary chalcogenide Cu2SnS3 (CTS) thin films are deposited on glass substrates using low cost ultra...
Thin films of Copper Sulphide (CuS) have been fabricated by chemical bath deposition (CBD) technique...
Tin disulphide (SnS2) thin films has been prepared on glass substrates by chemical spray pyrolysis t...
Polycrystalline copper sulphide (CuxS) thin films were grown by ultrasonic spray pyrolysis method us...
Thin films of Copper Tin Selenide (Cu2SnSe3), were successfully deposited on well-cleaned glass subs...
Thin films of (Cu2S)100-x( SnS2 )x at X=[ 30,40, &50)]% with thickness (0.9±0.03)µm , had been prepa...
Thin filis have been prepared from the tin disulphide (SnS2 ), the pure and the doped with copper ...
AbstractCopper sulphide CuS was deposited on three substrates; glass, Indium Tin Oxide (ITO) and Ti ...
The Cu 2 S and SnS 2 layers have been prepared by the chemical bath deposition method. The results o...
Thin films of copper sulfide (CuS) with various molarities values of Cu concentrations (0.2,0.3,0.4...
Thin films of SnS2 were prepared, as the absorber layer in solar cells, using an aqueous solution of...
Recent reports shows that tin sulphide (SnS) is a promising material as an absorber layer in solar c...
At this work, nanostructure copper sulfide (CuS) thin films at different temperature of substrate an...
Tin Sulphide (SnS) thin films have been deposited on glass slides by thermal evaporation using SnS p...
A research on the deposition and Characterization of SnS Thin Films by Chemical Bath Deposition Tech...
Ternary chalcogenide Cu2SnS3 (CTS) thin films are deposited on glass substrates using low cost ultra...
Thin films of Copper Sulphide (CuS) have been fabricated by chemical bath deposition (CBD) technique...
Tin disulphide (SnS2) thin films has been prepared on glass substrates by chemical spray pyrolysis t...
Polycrystalline copper sulphide (CuxS) thin films were grown by ultrasonic spray pyrolysis method us...
Thin films of Copper Tin Selenide (Cu2SnSe3), were successfully deposited on well-cleaned glass subs...