The paper reports the influence of annealing temperature under vacuum for one hour on the some structural and electrical properties of p-type CdTe thin films were grown at room temperature under high vacuum by using thermal evaporation technique with a mean thickness about 600nm. X-ray diffraction analysis confirms the formation of CdTe cubic phase at all annealing temperature. From investigated the electrical properties of CdTe thin films, the electrical conductivity, the majority carrier concentration, and the Hall mobility were found increase with increasing annealing temperatures
The structure of CdTe and its dependence upon evaporation conditions was determined for both 'flash'...
CdTe polycrystalline thin films had been fabricated using vacuum evaporation technique. Their proper...
CdTe polycrystalline thin films had been fabricated using vacuum evaporation technique. Their proper...
In the paper, the experimental results regarding the temperature dependence of the electrical conduc...
Basol, Bulent/0000-0002-7691-1113WOS: 000243868900038The effects of substrate temperature and post-d...
The electrical properties of polycrystalline cadmium telluride thin films of different thickness (20...
CdTe thin films were deposited on KCl and glass substrates using thermal evaporation technique under...
Nanocrystalline CdTe thin films (d=300nm- 500nm) deposited by thermal evaporation under vacuum using...
The influence of series resistance (Rs) on the current (I) – voltage(V) characteristics of evaporate...
Thin films of CdTe with different film thickness have been grown on glass substrates with different ...
Antimony telluride alloy thin films were deposited at room temperature by using the vacuum coevapora...
The structural, morphological and optical properties of vacuum-evaporated CdTe thin films were inves...
CdTe thin films of 500 thickness prepared by thermal evaporation technique were analyzed for leakage...
CdTe thin films of 500 thickness prepared by thermal evaporation technique were analyzed for leakage...
CdTe thin films were produced by vacuum evaporation on glass sheets at substrate temperatures of 100...
The structure of CdTe and its dependence upon evaporation conditions was determined for both 'flash'...
CdTe polycrystalline thin films had been fabricated using vacuum evaporation technique. Their proper...
CdTe polycrystalline thin films had been fabricated using vacuum evaporation technique. Their proper...
In the paper, the experimental results regarding the temperature dependence of the electrical conduc...
Basol, Bulent/0000-0002-7691-1113WOS: 000243868900038The effects of substrate temperature and post-d...
The electrical properties of polycrystalline cadmium telluride thin films of different thickness (20...
CdTe thin films were deposited on KCl and glass substrates using thermal evaporation technique under...
Nanocrystalline CdTe thin films (d=300nm- 500nm) deposited by thermal evaporation under vacuum using...
The influence of series resistance (Rs) on the current (I) – voltage(V) characteristics of evaporate...
Thin films of CdTe with different film thickness have been grown on glass substrates with different ...
Antimony telluride alloy thin films were deposited at room temperature by using the vacuum coevapora...
The structural, morphological and optical properties of vacuum-evaporated CdTe thin films were inves...
CdTe thin films of 500 thickness prepared by thermal evaporation technique were analyzed for leakage...
CdTe thin films of 500 thickness prepared by thermal evaporation technique were analyzed for leakage...
CdTe thin films were produced by vacuum evaporation on glass sheets at substrate temperatures of 100...
The structure of CdTe and its dependence upon evaporation conditions was determined for both 'flash'...
CdTe polycrystalline thin films had been fabricated using vacuum evaporation technique. Their proper...
CdTe polycrystalline thin films had been fabricated using vacuum evaporation technique. Their proper...