Effects of MgO on dielectric relaxation and phase transition of the ceramic matrix BaBi4Ti4O15

BaBi4Ti4O15 (BBT) ceramics doped with magnesium oxide in the weight concentration of 0, 1 and 2% (i.e. BBB_0, BBT_1 and BBT_2, respectively), were prepared by the solid–state reaction method. X-ray diffraction analysis and impedance spectroscopy measurements were employed to study the influence of the structural characteristics on the electrical properties. The formation of the orthorhombic phase for all samples with a decrease in the unit cell volume was due to insertion of Mg2+ into Ti4+ sites. With the increase of magnesium oxide amount there was a decrease in the value of the complex impedance, both real (ZReal), 4.75 × 107 Ω to 6.68 × 106 Ω, and imaginary (-ZImg), 2.13 × 107 Ω to 2.22 × 106 Ω, respectively for samples BBT - 0 and BBT - 2. Using an equivalent circuit including the contribution of grain and grain-boundaries, it was observed activation energies of 1.169 and 0.874 eV for the grain and 1.320 and 0.981 eV for the grain boundary for samples BBT_0 and BBT_2, respectively. The replacement of Mg2+ into Ti4+ sites shifts the dielectric constant maximum, measured at a fixed frequency, to occur at higher temperatures. Keywords: Doped BaBi4Ti4O15 ceramics, Dielectric relaxation, Phase transition, Impedance spectroscopy, Ionic conductivit