Add to ORKGThe aim of this work is to improve TBCs providing a self-healing ability. For that purpose, an aqueous suspension of SiCY-TZP and Al2O3 was prepared and deposited by suspension plasma spraying to avoid the oxidation of self-healingagent (SiC). The coatings obtained were microstructurally characterization to confirm the state of the self-healing particles
MgAl2O4 coatings, used for electrical insulation along the metallic seals in high temperature fuel c...
The present paper focuses on the Spark Plasma Sintering (SPS) manufacturing of a new type of self-he...
The insulating effects from thermal barrier coatings (TBCs) in gas turbine engines allow for increas...
The aim of this work is to improve TBCs providing a self-healing ability. For that purpose, an aqueo...
In order to obtain thermal barrier coatings by Suspension Plasma Spraying (SPS) process with potenti...
The present research focuses on the effect of feedstock suspension solid concentration on the micros...
The state-of-the-art material for the topcoat of thermal barrier coatings (TBCs) is yttria stabilize...
In this research, Suspension Plasma Spraying (SPS) technique was used for the thermal deposition of ...
Al2O3/TZ-3YS coatings developed by suspension plasma spraying were studied in the present work. Mec...
To improve the hot section metallic parts durability in advanced gas-turbine operating in power gene...
A self‐healing thermal barrier coating (TBC) system is manufactured by air plasma spraying (APS) and...
Abstract The thermal barrier coatings (TBCs) by gas tunnel-type plasma spraying exhibited ceramic-co...
The current paper reports self-healing plasma sprayed Mgspinel (MgAl2O4) coatings. The coatings were...
MgAl2O4 coatings, used for electrical insulation along the metallic seals in high temperature fuel c...
In the present study, yttria partially stabilised zirconia (YSZ)/Al2O3 coatings, which are used for ...
MgAl2O4 coatings, used for electrical insulation along the metallic seals in high temperature fuel c...
The present paper focuses on the Spark Plasma Sintering (SPS) manufacturing of a new type of self-he...
The insulating effects from thermal barrier coatings (TBCs) in gas turbine engines allow for increas...
The aim of this work is to improve TBCs providing a self-healing ability. For that purpose, an aqueo...
In order to obtain thermal barrier coatings by Suspension Plasma Spraying (SPS) process with potenti...
The present research focuses on the effect of feedstock suspension solid concentration on the micros...
The state-of-the-art material for the topcoat of thermal barrier coatings (TBCs) is yttria stabilize...
In this research, Suspension Plasma Spraying (SPS) technique was used for the thermal deposition of ...
Al2O3/TZ-3YS coatings developed by suspension plasma spraying were studied in the present work. Mec...
To improve the hot section metallic parts durability in advanced gas-turbine operating in power gene...
A self‐healing thermal barrier coating (TBC) system is manufactured by air plasma spraying (APS) and...
Abstract The thermal barrier coatings (TBCs) by gas tunnel-type plasma spraying exhibited ceramic-co...
The current paper reports self-healing plasma sprayed Mgspinel (MgAl2O4) coatings. The coatings were...
MgAl2O4 coatings, used for electrical insulation along the metallic seals in high temperature fuel c...
In the present study, yttria partially stabilised zirconia (YSZ)/Al2O3 coatings, which are used for ...
MgAl2O4 coatings, used for electrical insulation along the metallic seals in high temperature fuel c...
The present paper focuses on the Spark Plasma Sintering (SPS) manufacturing of a new type of self-he...
The insulating effects from thermal barrier coatings (TBCs) in gas turbine engines allow for increas...