Simulation and Experimental Study on the Discontinuous Dynamic Impact on Unidirectional Confined Coal-Rock Damage

The deformation and the damage characteristics of coal and rock under different restraint static load and different impact velocity were studied with the FEM software LS-DYNA. Based on this, the influence of impact load on the damage of coal rock under one-dimensional constraint condition was studied by using the self-developed constrained pendulum impact dynamic loading test device and ultrasonic testing device. The results show that the deformation of coal and rock increases with the increase of impact velocity and decreases firstly and then remains constant with the increase of constraint static load; when the constraint static load exceeds the compression strength, the displacement increases rapidly and the coal collapses at a strike; the damage quantity of coal and rock has a cumulative effect, and the damage quantity increases with the increase of impact number; when the constraint static load is identical, the increase of impulse contributes to microcrack propagation, and the damage quantity of coal and rock accelerates with the increase of single impact impulse; when the impulse is identical, the constraint static load restrains the microcrack propagation, and the damage quantity of coal and rock decelerates with the increase of constraint static load; the complete damage quantity range of coal and rock is 0.65∼0.75. In order to fully destroy the coal and rock, if the single horizontal impulse is greater, the number of shocks needed is less; if the constrained static load is greater, the more impact times are needed