In Vitro Effect of Drilling Speed on the Primary Stability of Narrow Diameter Implants with Varying Thread Designs Placed in Different Qualities of Simulated Bone

It is hypothesized that there is no statistically significant impact of drilling speed (DS) on the primary stability (PS) of narrow-diameter implants (NDIs) with varying thread designs placed in dense and soft simulated bone. The aim of this in vitro study was to evaluate the impact of DS on the PS of NDIs with varying thread designs placed in dense and soft simulated bone. Two hundred and forty osteotomies for placement of various implant macro-designs were divided into three groups (80 implants per group): Group A (NobelActive, 3.0/11.5 mm); Group B (Astra OsseoSpeed-EV, 3.0/11 mm); and Group C (Eztetic-Zimmer, 3.1/11.5 mm) implants. These implants were placed in artificial dense and soft simulated bone using DSs of 800 and 2000 revolutions per minute (RPM). Resonance frequency analysis (RFA) and implant stability quotient (ISQ) were assessed. Group comparisons were performed using the one-way analysis of variance with Tukey’s post hoc tests. Level of significance was set at P < 0.05. In groups A and B, there was no difference in the ISQ for NDIs inserted in dense bone at 800 and 2000 RPM. In Group C, ISQ was significantly higher for NDIs placed in dense bone at 800 PRM compared to 2000 RPM (P < 0.05). In Group A, ISQ values were significantly higher for NDIs inserted in soft bone at 2000 RPM as compared to those inserted at 800 RPM (P < 0.05). For NDIs, a lower drilling speed in dense artificial simulated bone and a higher drilling speed in soft artificial simulated bone is associated with high primary stability