Silica waveguide planar lightwave circuit (PLC) technology is driving the broad applications of various functional components to meet the increasing demands of the industry due to its advanced performance in large-scale wafer mass production. Despite the intense research interests in understanding and relaxing the stress causing the optical birefringence, not much research has been devoted to investigating the stress distribution. In this article, the thermal stress, growth-caused stress, and structural stress are comparably studied. The birefringence distribution of a 6 m-thick SiO2 film from the center to the edge on a 6-inch silicon wafer was measured to be 0.0006 to 0.0038, leading to an equivalent stress distribution cross the wafer fr...
A new fabrication technology for three-dimensionally buried silica on silicon optical waveguide base...
We report a method for stress measurement and analysis in silicon oxide thin films using optical int...
Stress application can be used to modify the optical properties of a device. The stress-optic effe...
We show that stress engineering can be used to adjust the SOI waveguide birefringence to the stringe...
We review the use of the oxide cladding stress induced photoelastic effect to eliminate the modal bi...
For a multilayered configuration of SiO2 film created by plasma enhanced chemical vapor deposition (...
Stress application can be used to modify the optical properties of a device. The stress-optic effect...
Abstract—This letter studies the effects of light propaga-tion direction on the stress-induced polar...
In this thesis work, a novel low level birefringence detection (LLBD) system operating at 1150 nm wa...
We demonstrate that stress engineering is an effective tool to modify or eliminate polarization disp...
This chapter reviews the characteristics of SOI ridge waveguide birefringence, as governed by the wa...
The stress distribution in silica optical waveguides on silicon is calculated by using finite elemen...
An integrated optical demultiplexer is an ideal device for the measurement of the effect of strain (...
We review the use of the oxide cladding stress-induced photoelastic effect to modify the polarizatio...
We propose and demonstrate the use of the cladding stress-induced photoelastic effect to eliminate m...
A new fabrication technology for three-dimensionally buried silica on silicon optical waveguide base...
We report a method for stress measurement and analysis in silicon oxide thin films using optical int...
Stress application can be used to modify the optical properties of a device. The stress-optic effe...
We show that stress engineering can be used to adjust the SOI waveguide birefringence to the stringe...
We review the use of the oxide cladding stress induced photoelastic effect to eliminate the modal bi...
For a multilayered configuration of SiO2 film created by plasma enhanced chemical vapor deposition (...
Stress application can be used to modify the optical properties of a device. The stress-optic effect...
Abstract—This letter studies the effects of light propaga-tion direction on the stress-induced polar...
In this thesis work, a novel low level birefringence detection (LLBD) system operating at 1150 nm wa...
We demonstrate that stress engineering is an effective tool to modify or eliminate polarization disp...
This chapter reviews the characteristics of SOI ridge waveguide birefringence, as governed by the wa...
The stress distribution in silica optical waveguides on silicon is calculated by using finite elemen...
An integrated optical demultiplexer is an ideal device for the measurement of the effect of strain (...
We review the use of the oxide cladding stress-induced photoelastic effect to modify the polarizatio...
We propose and demonstrate the use of the cladding stress-induced photoelastic effect to eliminate m...
A new fabrication technology for three-dimensionally buried silica on silicon optical waveguide base...
We report a method for stress measurement and analysis in silicon oxide thin films using optical int...
Stress application can be used to modify the optical properties of a device. The stress-optic effe...