Study on the Fracture Distribution Law and the Influence of Discrete Fractures on the Stability of Roadway Surrounding Rock in the Sanshandao Coastal Gold Mine, China

Cracks are critical for the deformation and failure of rock masses, but the effects of real cracks are rarely considered when evaluating the stability and safety of practical engineering. This paper presents a study on the application of fractures in the Sanshandao Gold Mine. Field investigation and statistical analysis methods were adopted to obtain the distribution laws of the cracks. Laboratory tests, MATLAB programming, and simulation using the software, GDEM (Gdem Technology, Beijing, China, Co., Ltd.), were employed to study the mechanical behaviors of rock masses with real fractures after excavation. The main results are as follows: (1) Three sets of highly discrete cracks were developed in the study area. Their inclination and dip can be approximately considered to follow a Gaussian distribution or uniform distribution. They had close ties to the three faults developed in the mining area. (2) Compared with the model that did not consider cracks and the model processed by the equivalence idea, the surrounding rock deformation caused by excavation of the model that considered real cracks was larger than that of the former and smaller than that of the latter. However, its influence range was larger than that of the other two models. The results show that it is reasonable to use three sets of discrete cracks to characterize the fracture distribution of the surrounding rock. In the evaluation of roadway stability, it is not advisable to use the equivalence method to deal with all the cracks. Considering a part of the cracks that are compatible with the size of the calculation model, a relatively accurate evaluation can be obtained in terms of the deformation, failure, and permeability changes of the surrounding rock