Depth of bulk solids and the lateral pressure with the dipping angle of 85° (a-d).</p
The plastic density (ρpl) is calibrated to the physical thickness of the SP34 slab phantom to determ...
Maximum cumulative displacement of the substratum of the Section K58 + 950 (Depth = 13.5m).</p
<p>Angle of mobilized friction and dilation curves for dense and loose samples.</p
Depth of bulk solids and the lateral pressure with the dipping angle of 90° (a-d).</p
Depth of bulk solids and the lateral pressure with the dipping angle of 80° (a-d).</p
Axial compressive ultimate bearing capacity of specimens with different concentrations of salt solut...
Percentage depth dose as a function of water-equivalent thickness using the ionization chamber.</p
The depth scaling factor (cpl) is calibrated to the density thickness of the SP34 slab phantom to de...
Porosity, bulk volume, and horizontal permeability equations along with their descriptions.</p
Percentage depth dose as a function of water-equivalent thickness using film dosimetry.</p
<p>Soil bulk density and field capacity at 0–200 cm soil depth with 20 cm increment.</p
Bed pressure distribution on two sides of the GMSP for different sloping angles.</p
Orientation and magnitude of three current principal stresses in Keshen area.</p
Bed pressure distribution on two sides of the GMSP for different relative plate heights.</p
A mathematical equation that describes the void fraction as a function of location, bulk density at ...
The plastic density (ρpl) is calibrated to the physical thickness of the SP34 slab phantom to determ...
Maximum cumulative displacement of the substratum of the Section K58 + 950 (Depth = 13.5m).</p
<p>Angle of mobilized friction and dilation curves for dense and loose samples.</p
Depth of bulk solids and the lateral pressure with the dipping angle of 90° (a-d).</p
Depth of bulk solids and the lateral pressure with the dipping angle of 80° (a-d).</p
Axial compressive ultimate bearing capacity of specimens with different concentrations of salt solut...
Percentage depth dose as a function of water-equivalent thickness using the ionization chamber.</p
The depth scaling factor (cpl) is calibrated to the density thickness of the SP34 slab phantom to de...
Porosity, bulk volume, and horizontal permeability equations along with their descriptions.</p
Percentage depth dose as a function of water-equivalent thickness using film dosimetry.</p
<p>Soil bulk density and field capacity at 0–200 cm soil depth with 20 cm increment.</p
Bed pressure distribution on two sides of the GMSP for different sloping angles.</p
Orientation and magnitude of three current principal stresses in Keshen area.</p
Bed pressure distribution on two sides of the GMSP for different relative plate heights.</p
A mathematical equation that describes the void fraction as a function of location, bulk density at ...
The plastic density (ρpl) is calibrated to the physical thickness of the SP34 slab phantom to determ...
Maximum cumulative displacement of the substratum of the Section K58 + 950 (Depth = 13.5m).</p
<p>Angle of mobilized friction and dilation curves for dense and loose samples.</p
DOI
Add to ORKG