Top right: compression test results at a strain rate of 10/s compared to simulation. Bottom left: tensile test results at a strain rate of 10/s compared to simulation. Bottom right: plate indentation test results for indentation speed of 50 mm/s compared to simulation. The plate thickness was 51.6 mm.</p
AbstractThe mechanical response of a thermoplastic elastomer synthetic ballistic gel is studied over...
The parallel-plate compression test is one of the simplest ways to measure the mechanical properties...
<p>Inflamed human tissue is displayed in orange while unaffected human and normal animal tissue is d...
<p>A: Position of the compression platen over time, as measured by its distance from the fixed platf...
<p>Left: Bone (B) undergoing compression testing between two stainless steel platens (P). The blue a...
AbstractMechanical characterisation of soft biological tissues using standard compression or tensile...
<p>Comparative assessment of uni-axial tensile testing results between UBM, ileum and bladder tissue...
<p>(A) Compressive properties of the soft tissue surrogate (20 wt-% ballistic gelatine at room tempe...
<p>Strips of UBM (40 mm ×9.3 mm ×0.20±0 mm), ileum (40 mm ×9.3 mm ×0.35±0 mm) and bladder tissue (30...
Background: Instrumentation, relying on the use of negative pressure (suction), has been introduced ...
Tensile and compressive tests were carried out on a selection of metals of interest in engineering ...
In modelling the mechanical behavior of soft tissues, the proper choice of an experiment for identif...
Compression experiments comparing fracture development using the initial strength of the sample mate...
The method for determining the transverse mechanical response of Kevlar KM2 and Dyneema SK76 fiber...
<p>a) & b) Confined compression samples of cartilage from the medial and lateral femoral condyles an...
AbstractThe mechanical response of a thermoplastic elastomer synthetic ballistic gel is studied over...
The parallel-plate compression test is one of the simplest ways to measure the mechanical properties...
<p>Inflamed human tissue is displayed in orange while unaffected human and normal animal tissue is d...
<p>A: Position of the compression platen over time, as measured by its distance from the fixed platf...
<p>Left: Bone (B) undergoing compression testing between two stainless steel platens (P). The blue a...
AbstractMechanical characterisation of soft biological tissues using standard compression or tensile...
<p>Comparative assessment of uni-axial tensile testing results between UBM, ileum and bladder tissue...
<p>(A) Compressive properties of the soft tissue surrogate (20 wt-% ballistic gelatine at room tempe...
<p>Strips of UBM (40 mm ×9.3 mm ×0.20±0 mm), ileum (40 mm ×9.3 mm ×0.35±0 mm) and bladder tissue (30...
Background: Instrumentation, relying on the use of negative pressure (suction), has been introduced ...
Tensile and compressive tests were carried out on a selection of metals of interest in engineering ...
In modelling the mechanical behavior of soft tissues, the proper choice of an experiment for identif...
Compression experiments comparing fracture development using the initial strength of the sample mate...
The method for determining the transverse mechanical response of Kevlar KM2 and Dyneema SK76 fiber...
<p>a) & b) Confined compression samples of cartilage from the medial and lateral femoral condyles an...
AbstractThe mechanical response of a thermoplastic elastomer synthetic ballistic gel is studied over...
The parallel-plate compression test is one of the simplest ways to measure the mechanical properties...
<p>Inflamed human tissue is displayed in orange while unaffected human and normal animal tissue is d...