Multistimuli-Responsive Foams Using an Anionic Surfactant

In this work, we report a novel class of a commercially available surfactant which shows a multistimuli-responsive behavior toward foam stability. It comprises three componentsa hydrophobe (tristyrylphenol), a temperature-sensitive block (polypropylene oxide, PO), and a pH-sensitive moiety (carboxyl group). The hydrophobicity–hydrophilicity balance of the surfactant can be tuned by changing either the pH or temperature of the system. At or below pH 4, the carboxyl functional group is dominantly protonated, resulting in zero foamability. At higher pH, the surfactant exhibits good foamability and foam stability marked with a fine bubble texture (∼200 μm). Foam destabilization could be achieved rapidly by either lowering the pH or bubbling CO2 gas. At a fixed pH in the presence of salt, increasing the temperature to 65 °C resulted in rapid defoaming because of the increased hydrophobicity of the PO chain. This stimuli-induced stabilization and destabilization of foam were found to be reversible. We envisage the use of such a multi-responsive foaming system in diverse applications such as foam-enhanced oil recovery and environmental remediation where spatial and temporal control over foam stability is desirable. The low-cost commercial availability of the surfactant further makes it lucrative