(a-b) Patch of polishing visible through the metallographic microscope (100x), localised on the top of the grain; (c-d) smooth/flat patch of polishing visible through the metallographic microscope (200x).</p
This paper demonstrates how careful microscopy of worn ceramic surfaces can be used to provide infor...
The analysis of microwear patterns, including scratch types and widths, has enabled reconstruction o...
The experiments are conducted for different clearances between punch and die. It is observed that, b...
a-b) discolouration in parallel bands due to bindings (7.5x); c) tar residue at the haft limit and t...
(a) Polishing (100x) affecting the top of the grains; (b) patch of polish characterised by a flat to...
This paper presents application of optical microscope for evaluation of microtexture changes of coar...
(a) Macro-traces (20x), small circular pits associated with long parallel striations, located in api...
The implications of the polishing techniques in quantative x-ray microanalysis were discussed. Two a...
An experimental study has been made of the polishing of brittle solids with diamond and alumina abra...
In detail, scaled retouch (FSR-1), marginal retouch (FRP-1), bipolar percussion (FA-8), striking pla...
Traceological studies aim at the recognition and the identification of use-wear traces on artefacts ...
Lubrication in metalworking processes is characterized by plastic deformation conditions resulting i...
Abrasives are used in various forms to produce fine finishes on metal surfaces. Previously, grinding...
(a) Experimental striations (10x) related to the overhang abrasion, localised (b) on the flat surfac...
There have been few attempts to conduct highly controlled laboratory experiments to isolate how wear...
This paper demonstrates how careful microscopy of worn ceramic surfaces can be used to provide infor...
The analysis of microwear patterns, including scratch types and widths, has enabled reconstruction o...
The experiments are conducted for different clearances between punch and die. It is observed that, b...
a-b) discolouration in parallel bands due to bindings (7.5x); c) tar residue at the haft limit and t...
(a) Polishing (100x) affecting the top of the grains; (b) patch of polish characterised by a flat to...
This paper presents application of optical microscope for evaluation of microtexture changes of coar...
(a) Macro-traces (20x), small circular pits associated with long parallel striations, located in api...
The implications of the polishing techniques in quantative x-ray microanalysis were discussed. Two a...
An experimental study has been made of the polishing of brittle solids with diamond and alumina abra...
In detail, scaled retouch (FSR-1), marginal retouch (FRP-1), bipolar percussion (FA-8), striking pla...
Traceological studies aim at the recognition and the identification of use-wear traces on artefacts ...
Lubrication in metalworking processes is characterized by plastic deformation conditions resulting i...
Abrasives are used in various forms to produce fine finishes on metal surfaces. Previously, grinding...
(a) Experimental striations (10x) related to the overhang abrasion, localised (b) on the flat surfac...
There have been few attempts to conduct highly controlled laboratory experiments to isolate how wear...
This paper demonstrates how careful microscopy of worn ceramic surfaces can be used to provide infor...
The analysis of microwear patterns, including scratch types and widths, has enabled reconstruction o...
The experiments are conducted for different clearances between punch and die. It is observed that, b...