UTILIZATION OF WIND POWER IN RWANDA: Design and Production Option

This Master Thesis is the research done in the country of Rwanda. The project leads to study the climate of this country in order to establish whether this climate could be used to produce energy from air and to implement the first wind turbine for serving the nation. After an introduction about the historical background of wind power, the thesis work deals with assessment of wind energy potential of Rwanda in focusing of the most suitable place for wind power plants. The best location with annual mean wind speed, the rate of use of turbine with hub height for an annual production per year, the mean wind speeds for 6 sites of Rwanda based on ECMWF for climatic data for one year at relief of altitude of 100m and coordinates are reported too. The result of energy produced and calculations were done based on power hitting wind turbine generator in order to calculate Kinetic energy and power available at the best location to the measurement over the period of 12 months, that could be hoped for long term. With help of logarithmic law, where wind speed usually increases with increasing in elevation and the desired wind speeds at all 6 sites were used. The annual energy production was taken into account at the best site with desired wind speed at the initial cost of turbine as well as the cost of energy (COE).However, with comparison of the tariff of EWSA, the price of Wind designed in this Research per kWh is cheaper and suitable for people of Rwanda.I WISH TO PUBLISH MY THESIS