Soledge2D-Eirene simulations of the Pilot-PSI linear plasma device compared to experimental data

International audiencePredictions for the operation of tokamak divertors are reliant on edge plasma simulations typically utilizing a fluid plasma code in combination with a Monte Carlo code for neutral species. Pilot-PSI is a linear device operating with a cascaded arc plasma source that produces plasmas comparable to those expected in the ITER divertor (Te ∼ 1 eV, ne ∼ 10 21 m −3). In this study, plasma discharges in Pilot-PSI have been modelled using the Soledge2D fluid plasma code [1] coupled to the Eirene neutral Monte Carlo code. The plasma is generated using an external source of plasma density and power. These input parameters are tuned in order to match Thomson scattering (TS) measurements close to the cascaded arc source nozzle. The sensitivity of the simulations to different atomic physics models was explored. It was found that elastic collisions between ions and hydrogen molecules have a strong influence on calculated profiles. Without their inclusion, supersonic flow regimes are obtained with M ∼ 2 close to the target plate. Simulation results have been compared with experimental findings using TS close to the target and in the case of Pilot-PSI, a Langmuir probe embedded in the target. Comparison between experimental trends observed in a background pressure scan [2] and the simulations show that the inclusion of the elastic collision is mandatory for the trends to be reproduced