Concretes whose structure and final properties are shaped during thermal pre-treatment or during life-service at elevated temperatures can be applied as construction material for thermal insulation and/or refractory linings in high-temperatureoperating plants. Refractory concretes designed with waste raw materials show satisfying performances in comparison with standard concretes. Sintering initiates microstructural changes within concrete. Concrete microstructure further develops with increasing temperature. Change progression can be monitored by means of destructive and non-destructive tests: either by investigating change of compressive strength or apparent porosity of concrete samples. Destructive tests, in this study, were applied in c...
This paper is concerned with quantitative formulation of the mechanism of the sintering process duri...
Results are provided for development of refractory concrete based on modified alumina cement using c...
A considerable number of investigations have been conducted on the mechanical and material propertie...
Concretes whose structure and final properties are shaped during thermal pre-treatment or during lif...
Concrete undergoing thermal treatment before and during life-service can be applied as building mate...
Concrete which undergoes a thermal treatment before (pre-casted concrete blocks) and during (concret...
The aim of this paper is to establish the correlation among sintering process, porosity, and importa...
The effects that the fly ash addition has on the behavior of thermally resistant corundum concrete w...
In this paper, the results of a preliminary laboratory study to assess the effectiveness of thermall...
Sustainability requirements are gaining importance in the construction industry, which needs to take...
Recycled concrete aggregate (RCA) obtained from crushed concrete has different properties than those...
Aim of this paper is to establish the correlation between sintering process, porosity and important ...
Concrete is a building material commonly used for ages. Therefore, in the result of repairs or demol...
This study presents the results of an experimental campaign aimed at investigating the influence of ...
In this paper, the effects of high temperature exposure of recycled aggregate concretes in terms of ...
This paper is concerned with quantitative formulation of the mechanism of the sintering process duri...
Results are provided for development of refractory concrete based on modified alumina cement using c...
A considerable number of investigations have been conducted on the mechanical and material propertie...
Concretes whose structure and final properties are shaped during thermal pre-treatment or during lif...
Concrete undergoing thermal treatment before and during life-service can be applied as building mate...
Concrete which undergoes a thermal treatment before (pre-casted concrete blocks) and during (concret...
The aim of this paper is to establish the correlation among sintering process, porosity, and importa...
The effects that the fly ash addition has on the behavior of thermally resistant corundum concrete w...
In this paper, the results of a preliminary laboratory study to assess the effectiveness of thermall...
Sustainability requirements are gaining importance in the construction industry, which needs to take...
Recycled concrete aggregate (RCA) obtained from crushed concrete has different properties than those...
Aim of this paper is to establish the correlation between sintering process, porosity and important ...
Concrete is a building material commonly used for ages. Therefore, in the result of repairs or demol...
This study presents the results of an experimental campaign aimed at investigating the influence of ...
In this paper, the effects of high temperature exposure of recycled aggregate concretes in terms of ...
This paper is concerned with quantitative formulation of the mechanism of the sintering process duri...
Results are provided for development of refractory concrete based on modified alumina cement using c...
A considerable number of investigations have been conducted on the mechanical and material propertie...