A la composition Mg-31 at.% Al, le système Magnésium-Aluminium présente un eutectique dont la microstructure est formée d'une matrice de phase métallique complexe gamma-Mg17Al12 et de fibres de Magnésium. Au cours de la thèse, une série d'alliages Mg-Al eutectiques et hypo-eutectiques a été élaborée par solidification afin d'obtenir des composites in situ à différentes fractions volumiques de phase complexe. Ces alliages constituent un type nouveau de composites à phases métalliques complexes. L'étude du comportement mécanique à l'ambiante révèle la possibilité d'une plasticité de ces composites même pour des fractions volumiques élevées de phase gamma-Mg17Al12, phase très dure mais fragile à l'état massif. A chaud (250°C-350°C), pour tous ...
In this paper, the effect of equal channel angular pressing (ECAP) on microstructure and mechanical ...
Mg-9Al-1Si-1SiC composites with various initial microstructures prior to equal channel angular press...
The evolution of microstructure during the pressure-composition-temperature (PCT) test at 350 °C for...
International audienceDeformation tests at room temperature have been carried out on a series of in ...
Eutectic alloys demonstrate excellent casting behavior and composite properties. Their morphologies ...
In a series of Mgx(Al2Ca)100-x (76 £ x £ 87) ternary alloys near the Mg-(Mg,Al)2Ca pseudo-binary eut...
A processing technique has been developed to produce a layered magnesium-intermetallic compound ligh...
The present paper is aimed to further elucidate the microstructure properties relationship of light ...
International audienceWe report initial results on high-temperature deformation of a complex metalli...
Lightweight metal matrix composites are synthesized from elemental powder mixtures of aluminum and m...
The effects of Mg content on the microstructure and tensile properties of thixoformed A319 alloys we...
As-cast AZ80 magnesium alloy consists of α-Mg, eutectic product of α-Mg and γ-Mg17...
The structural evolution during mechanical alloying of blended elemental powder mixtures of Mg and A...
The effect of Ce-rich mischmetal (RE) contents on microstructures and mechanical properties of the A...
Microstructure development and mechanical properties of Al–xMg alloys (x = 0, 1, 5–10 wt%), processe...
In this paper, the effect of equal channel angular pressing (ECAP) on microstructure and mechanical ...
Mg-9Al-1Si-1SiC composites with various initial microstructures prior to equal channel angular press...
The evolution of microstructure during the pressure-composition-temperature (PCT) test at 350 °C for...
International audienceDeformation tests at room temperature have been carried out on a series of in ...
Eutectic alloys demonstrate excellent casting behavior and composite properties. Their morphologies ...
In a series of Mgx(Al2Ca)100-x (76 £ x £ 87) ternary alloys near the Mg-(Mg,Al)2Ca pseudo-binary eut...
A processing technique has been developed to produce a layered magnesium-intermetallic compound ligh...
The present paper is aimed to further elucidate the microstructure properties relationship of light ...
International audienceWe report initial results on high-temperature deformation of a complex metalli...
Lightweight metal matrix composites are synthesized from elemental powder mixtures of aluminum and m...
The effects of Mg content on the microstructure and tensile properties of thixoformed A319 alloys we...
As-cast AZ80 magnesium alloy consists of α-Mg, eutectic product of α-Mg and γ-Mg17...
The structural evolution during mechanical alloying of blended elemental powder mixtures of Mg and A...
The effect of Ce-rich mischmetal (RE) contents on microstructures and mechanical properties of the A...
Microstructure development and mechanical properties of Al–xMg alloys (x = 0, 1, 5–10 wt%), processe...
In this paper, the effect of equal channel angular pressing (ECAP) on microstructure and mechanical ...
Mg-9Al-1Si-1SiC composites with various initial microstructures prior to equal channel angular press...
The evolution of microstructure during the pressure-composition-temperature (PCT) test at 350 °C for...