IMPEDANCE CONTROL OF MICROSTRIP ANTENNAS UTILIZING REACTIVE LOADING

International Telemetering Conference Proceedings / October 13-16, 1986 / Riviera Hotel, Las Vegas, NevadaA study has been undertaken to determine the feasability of dynamically controlling the input impedance of a microstrip antenna element by changing its reactive loading. The major applications of such an element would be for use in a scanned phased array. By changing the loading of individual elements appropriately, one could alter the active array impedance of the elements to compensate to some degree for the onset of scan blindness. While the ultimate feasability of such applications cannot yet be firmly established, a single element can be controlled using PIN diodes to effectively alter its input impedance. The generalized theory of loaded microstrip antennas has been used to predict the impedance of a variety of microstrip, antenna configurations with multiple loads. This work has shown the possibilities of changing the input impedance of the radiator over a wide range of values without affecting its resonant frequency or radiation pattern by moving a set of short-circuited loads from one position to another. Actual printed-circuit antennas were fabricated based on this design and good correlation was found between theory and experiment.International Foundation for TelemeteringProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection