DSP BASED SIGNAL PROCESSING UNIT FOR REAL TIME PROCESSING OF VIBRATION AND ACOUSTIC SIGNALS OF SATELLITE LAUNCH VEHICLES

International Telemetering Conference Proceedings / October 30-November 02, 1995 / Riviera Hotel, Las Vegas, NevadaMeasurement of vibration and acoustic signals at various locations in the launch vehicle is important to establish the vibration and acoustic environment encountered by the launch vehicle during flight. The vibration and acoustic signals are wideband and require very large telemetry bandwidth if directly transmitted to ground. The DSP based Signal Processing Unit is designed to measure and analyse acoustic and vibration signals onboard the launch vehicle and transmit the computed spectrum to ground through centralised baseband telemetry system. The analysis techniques employed are power spectral density (PSD) computations using Fast Fourier Transform (FFT) and 1/3rd octave analysis using digital Infinite Impulse Response (IIR) filters. The programmability of all analysis parameters is achieved using EEPROM. This paper discusses the details of measurement and analysis techniques, design philosophy, tools used and implementation schemes. The paper also presents the performance results of flight models.International Foundation for TelemeteringProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection