AN APPLICATION OF THE VIDEO MATCHED FILTERS IN PULSE TELEMETERING RECEIVER

International Telemetering Conference Proceedings / October 28-31, 1996 / Town and Country Hotel and Convention Center, San Diego, CaliforniaIt is well known that the pulse telemetering system whose system equipment is simple is superior to the continuous one in ultilizing signal power. But in designing a pulse telemetering receiver the frequency shift problem is often encountered, the shift often greatly wider than the signal bandwidth is very unfavorable for improving receiver working sensitivity. Either to limit transmitter frequency stability strictly or to adapt AFC system in receiver for tracking carrier wave can solve the problem above, the AFC system method could improve the receiver’s performance, but the equipment is complicated. To what extent the receiver working sensitivity will be effected and how to judge the effection in case of adapting VF matched filter and RF being wideband in receiver are this paper’s emphasis. In this paper the power density spectrum distribution of the white noise which has passed through the non-linear system-the linear detector is analysed theoretically, and the improved working sensitivity of the receiver with video matched filter and its difference sensitivity value to that of the optimal receiver are derived. The tested working sensitivity data of two kind pulse receivers with different RF bands are given and the theoretical calculation results conform well with these data, thus it is proven that adapting video matched filter in pulse receiver is a effective approach for compensating the receiver working sensitivity dropping from RF bandwidth increase.International Foundation for TelemeteringProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection